Final company analysis
Research your company's accounting and write five training notes for a new hire joining from a peer company.
What you will submit
Submit your report and workbook through D2L by Thursday, December 17, at 1 p.m. Eastern time. The final company analysis is worth 70 points.
I will accept the final company analysis up to 24 hours late, until Friday, December 18, at 1 p.m. Eastern time. Late submissions receive a deduction of 10% of the possible points, unless I have approved an extension or the submission qualifies for a protected absence.
The separate 30-point take-home analysis is also due December 17 at 1 p.m. Eastern. Follow its own instructions for submission and late work.
Submit 2 files: 1 Word or PDF report and 1 Excel workbook. The report contains a training note and scenario analysis for each of your 5 topics. The workbook contains 5 matching topic tabs.
Do not include your name, student ID, or other personal identifying information in either file or its filename.
Choose your topics and peers
- Keep your primary company and your midpoint peers. Use each company's most recent annual report, even if you used an older report at the midpoint. When a question requires earlier-year amounts, use the comparative amounts in that latest report.
Check your choices. Use the topic lookup below to find which assignment topics and question versions you may choose. This tracker has been updated for the final project. Use it instead of the earlier company picker to select your final topics. Enter your primary company and both midpoint peers once. The results identify which peer or peers you may use for each question version.
Select your topics. Choose 5 topics, including at least 2 Regular reporting topics and at least 1 Specific event or exposure topic.
Choose 5 different topic headings. If a topic offers multiple versions, choose only 1 version for that topic.
- For each of the 5 topics you chose, pick 1 of your 2 midpoint peers to compare with your primary company. Each topic must use 1 of your 2 originally selected peers. You may use the same peer for all 5 topics or use different peers for different topics.
Find topics for your three companies
Use your primary company's policies and amounts for the work requested in each topic. Some questions permit an actual example from your selected peer. Read the topic question before making your choice.
Enter your primary company and both midpoint peers. Each question version lists which peers you may use. Counts refer to different topics, not the number of versions within a topic. Choose only 1 version of any topic. Find and evaluate the relevant disclosures yourself; the lookup does not supply the company analysis.
Complete each topic
You work in the accounting department of your primary company. A new hire has joined from the peer company you selected for this topic. Write a training note that prepares the new hire to handle this accounting topic at your company.
Complete both parts for each of your 5 topics: Part 1, the training note, and Part 2, the scenario analysis. Each topic is worth 14 points, for 70 points across the 5 topics.
The instructions under each topic include all required sections and their point values. Complete both parts for the version you select.
Organize your report by topic
For each topic, use the following order. Finish both parts before starting the next topic.
Topic title and selected version. Identify your primary company, selected peer, and matching workbook tab.
Part 1: Training note. Use three headings: Accounting guidance; Company accounting and peer comparison; Procedures for the new hire.
Part 2: Scenario analysis. Explain your decisions and key results. Refer to the calculations and entries in your workbook.
Length, scenario facts, and assumptions
There is no required page count. Write concise, complete answers to every requested part. Use the sample to judge the depth of explanation, allowing for differences between topics. Your grade depends on completeness, accuracy, and reasoning rather than length.
Keep your primary company as the focus of the note. The intangible, contingency, and long-lived-asset questions explain when you may use an actual example from your selected peer. Identify the company that reports the example. You may use an event from an earlier comparative year disclosed in the latest annual report. Complete the hypothetical scenario in every case.
The scenarios below are hypothetical. Their transactions and amounts are not facts about your selected company. Use the supplied facts and applicable accounting guidance to complete Part 2. You do not need company filing amounts, methods, or estimates for the scenarios. If a scenario leaves a necessary fact unstated, identify a reasonable assumption and explain why you need it. Your assumption must be consistent with the supplied facts and accounting guidance. Do not present an assumption as a company disclosure.
For the hypothetical scenarios, use a year ending December 31 and any additional dates specified in the supplied facts. Apply the guidance for your primary company's reporting period to the hypothetical scenario. For actual company amounts and comparisons, use the fiscal periods in each company's latest annual report.
Prepare these files
- Written report (Word or PDF). Include both parts for each topic: the training note and the scenario analysis. Use the report structure shown here and the instructions under your selected topic. Explain your accounting decisions and state the results. Identify the topic, selected version, primary company, selected peer, and workbook tab for each note.
- Excel workbook. Create a new workbook with 1 tab for each selected topic. Include the inputs, calculation formulas, and journal entries on that tab. You may type supplied facts and amounts from filings. Use Excel formulas for calculated results rather than typing the answers. Label the dates and units. You may also include key calculations or entries in your report when they help the explanation.
Use short, descriptive tab names. At the top of each tab, identify the full topic title and selected version. Separate company calculations from hypothetical scenario calculations with clear labels. Explain your conclusions and key results in the report, and show formulas and journal entries in the workbook. A workbook reference does not replace the explanation in your note.
Using your midpoint work
You do not need to copy the midpoint statement tabs or resubmit the midpoint analyses. You may reuse amounts, but verify them against the original filing and correct any errors. Errors carried forward from the midpoint will be graded as errors in the final submission.
Cite your sources
For company facts and amounts, cite the annual report, reporting period, and page or note where the information appears. Put the citation beside the information in your report or workbook. A reference to your midpoint assignment or a cell in that workbook does not satisfy the source requirement.
Cite the Accounting Standards Codification (ASC) paragraphs you use for accounting guidance. Use the guidance applicable to the reporting period in that annual report. Clearly identify any assumptions you make. Do not present an assumption as a fact disclosed by the company.
Use earlier-year amounts only where the topic question requests them. You do not need a separate 2-year analysis for every topic.
Supported conclusions
For company accounting and peer comparison, your disclosures must be accurate, relevant, and sufficient to support your accounting explanation and required company-specific work. Missing information affects your score when a required conclusion, calculation, or comparison lacks support.
Where the question permits judgment, more than one conclusion may earn full credit. Support your conclusion with applicable accounting guidance, relevant company disclosures, and any necessary assumptions.
You may agree with management's reported treatment and earn full credit. Apply the accounting criteria to the disclosed facts and support your conclusion; agreement alone is not an explanation.
Use the sample to judge the expected depth
Read the complete example below before drafting your notes. It illustrates how to select and use supporting information; it is not a checklist of disclosures for other topics.
Sample report and workbook: Interest during construction
Not on the menu
This sample includes both the training note and the separate scenario analysis. Use it as a guide to organization and depth. Interest during construction is not a topic you may select for this project.
Download the sample Excel workbook (.xlsx). Read it alongside the sample student submission. The report explains the accounting; the workbook contains the detailed calculations and journal entries.
The sample workbook uses formulas for calculated results. Select a result cell, such as C30 on the Construction interest tab, to see its formula in Excel's formula bar. The blue figures are supplied inputs; the black figures are formula results.
The student works at Carnival Corporation. The new hire joined from Royal Caribbean Cruises. Carnival annual report for the fiscal year ended November 30, 2025. Royal Caribbean annual report for the fiscal year ended December 31, 2025.
Source reports: Carnival FY2025 Form 10-K; Royal Caribbean FY2025 Form 10-K.
Assignment instructions provided to the student
Part 1: Training note (8 points)
- Accounting guidance (3 points). Research which construction assets qualify for interest capitalization, when capitalization starts and ends, how to calculate the amount, and its limit. Explain the requirements and cite the applicable ASC paragraphs.
- Company accounting and peer comparison (3 points). Explain Carnival's interest-capitalization accounting using its disclosures. Compare it with Royal Caribbean and explain how capitalized interest later reaches the income statement. Cite the company disclosures you use.
- Procedures for the new hire (2 points). Give the information to collect, decisions to make, and period-end steps for capitalizing interest.
Part 2: Scenario analysis (6 points)
Supplied facts
On January 1 the company begins to build a terminal building for its own use. It pays the builder $6,000,000 on January 1 and $6,000,000 on July 1. The building is ready for use on December 31. On January 1 the company borrowed $5,000,000 at 6% for this project. Its other borrowings carry a weighted-average rate of 8%. The company's actual interest cost on all borrowings for the year is $4,000,000, and it paid that interest in cash. Management estimates a 40-year useful life and no residual value for the building. The company uses straight-line depreciation and begins depreciation in the year after the December 31 ready date.
Required work
Compute the interest the company adds to the cost of the building and record the entries. Explain when that capitalized interest reaches the income statement and calculate the annual depreciation using the supplied estimates.
Sample student submission
Part 1: Training note
1. Accounting guidance 3 points
When a company builds an asset for its own use, the interest it incurs during construction is part of the cost of that asset (ASC 835-20-15-5). The company reports that interest as an asset during construction. It becomes an expense later, through depreciation.
Capitalization starts when 3 conditions exist together: the company has made expenditures for the asset, the work is in progress, and the company is incurring interest (835-20-25-3). It ends when the asset is substantially complete and ready for its intended use (835-20-25-5). If substantially all project activity stops, capitalization generally pauses; the guidance provides exceptions for certain interruptions (ASC 835-20-25-4).
The amount to capitalize is the interest the company could have avoided if it had not made the expenditures, called avoidable interest (835-20-30-2). The company applies its borrowing rates to the weighted-average accumulated expenditures (835-20-30-3). These are the payments weighted by the part of the year each was outstanding. A company may use the rate on a borrowing specifically associated with the project for expenditures up to that borrowing amount. For expenditures above it, the company uses a weighted-average rate on other borrowings.
Capitalized interest cannot exceed the actual interest the company incurred in the period (835-20-30-6). The company capitalizes the smaller of avoidable interest and actual interest.
2. Company accounting and peer comparison 3 points
Carnival adds interest incurred during construction to the cost of capital projects. Its policy also includes progress payments and construction-related costs in ships under construction. These projects create assets for future use, which fits the qualifying-asset requirement in ASC 835-20-15-5. The timing of construction activity matters; paying interest alone does not establish that it qualifies for capitalization (Carnival, FY2025 Form 10-K, Note 2, Property and Equipment, pages 51-52).
Carnival reports capitalized interest of $75 million in 2025 and $61 million in 2024, and ships under construction of $464 million at November 30, 2025. These disclosures identify actual construction assets and capitalized costs. They do not provide project-level payments, borrowing rates, or capitalization dates sufficient to reconstruct the $75 million calculation (Carnival, FY2025 Form 10-K, Note 3, Property and Equipment).
Royal Caribbean also adds interest to asset cost during active construction and subsequently depreciates it. Its construction assets therefore receive the same recognition and timing treatment under the qualifying-asset and capitalization-period criteria. Royal Caribbean reports $85 million of capitalized interest in 2025. The difference from Carnival's $75 million does not establish a different accounting policy or rate; the companies have different projects and financing (Royal Caribbean, FY2025 Form 10-K, Note 2, Property and Equipment, and Note 6, Property and Equipment).
Both companies use straight-line depreciation and disclose building and improvement lives of 10 to 40 years. Carnival discloses a residual value of 0% for that category. Capitalized interest included in a completed building therefore reaches expense through depreciation over the selected useful life. A disclosed range does not itself establish the useful life of an individual new building (Carnival, FY2025 Form 10-K, Note 2, Property and Equipment, page 51; Royal Caribbean, FY2025 Form 10-K, Note 2, Property and Equipment).
3. Procedures for the new hire 2 points
For each construction project, document the first expenditure, the start of construction activity, and when interest begins to accrue. Start capitalization only when all 3 conditions exist. Stop when the asset is substantially complete and ready for use. Check for interruptions in construction and determine whether capitalization should pause.
At each period-end, list qualifying payments and their dates. Compute weighted-average accumulated expenditures. Document the borrowing-rate method used under ASC 835-20-30-3. Obtain the rates needed for that method and actual interest incurred from the treasury group.
Compute avoidable interest, compare it with actual interest, and capitalize the smaller amount. Reconcile the capitalized amount to the project ledger and record the interest allocation. When the asset is ready, transfer its full cost to the asset account and begin depreciation using the documented useful life and residual estimate.
Part 2: Scenario analysis
Scenario analysis 6 points
The terminal qualifies for interest capitalization because we are building it for our own use. On January 1 we made the first payment, construction began, and we were incurring interest. All 3 conditions for capitalization exist. The building is ready on December 31, so the capitalization period is the full year.
The Construction interest workbook tab contains the inputs and calculations. Cells C25:C29 calculate weighted-average accumulated expenditures and avoidable interest. The January payment is outstanding longer than the July payment, so it receives more weight. I use the project-specific borrowing rate for the portion covered by that loan, as permitted by ASC 835-20-30-3. The other borrowing rate applies to the remainder.
Avoidable interest is $620,000, below actual interest of $4,000,000. We therefore capitalize $620,000 and report interest expense of $3,380,000. Cells C30:C31 apply the limit and calculate the expense. The entries in B38:D58 record the borrowing and construction payments, allocate interest paid, and transfer the completed building from construction in progress. The completed building cost is $12,620,000.
The scenario supplies a 40-year useful life, no residual value, and straight-line depreciation. It also specifies that depreciation begins in the following year because the building becomes ready on December 31. Cells C34:C35 calculate annual depreciation of $315,500, including $15,500 from capitalized interest. Capitalization therefore delays that portion of interest expense until the building is used.
AI use: I used ChatGPT to help draft and revise my report and create my workbook. I checked the accounting explanations and company information against the cited ASC paragraphs and filings. I also verified the workbook formulas, calculations, and journal entries.
Topic questions and scenarios
Choose 5 topics total from the list below. Of those 5, choose at least 2 Regular reporting topics and at least 1 Specific event or exposure topic. If a topic offers multiple versions, choose only 1 version. It counts as 1 of your 5 topics.
Open each selected topic and read its question before starting your research. Complete both parts for each selected topic: the training note and the scenario analysis.
Regular reporting
Include at least 2 of these in your 5 required topics.
- Revenue and contract balances (Unit 2)
- Current and noncurrent debt (Unit 3)
- Inventory cost methods and measurement (Unit 5)
- Property, plant, and equipment: depreciation (Unit 6)
- Intangible assets (Unit 7)
- Allowance for credit losses (Unit 4)
Specific event or exposure
Include at least 1 of these in your 5 required topics.
- Inventory write-downs and reserves (Unit 5)
- Goodwill: acquisitions and impairment (Unit 7)
- Loss contingencies (Unit 3)
- Long-lived assets: impairment and sale (Unit 6)
- Product warranties (Unit 3)
Revenue and contract balances
Unit 2
Part 1: Training note (8 points)
Accounting guidance (3 points)
Research how a company identifies separate promises in a customer contract and determines when to recognize revenue for each. Explain how it accounts for payment received before it completes a promised product delivery or service.
Identify the Accounting Standards Codification (ASC) paragraphs that answer these questions. Explain the requirements in your own words for the new hire, and cite the paragraphs you use.
Company accounting and peer comparison (3 points)
- Select a disclosed customer arrangement for which your company receives payment before completing its promised performance. Explain its performance obligations and revenue timing, and identify how the annual report presents its liability. If the report does not identify its balance-sheet caption, state that limitation. Support your explanation with disclosed facts.
- Compare your primary company with your selected peer. State whether their relevant policies, estimates, or reported treatments differ. Apply the accounting criteria to both companies and explain the effect on recognition, measurement, or timing. If they use the same treatment, explain why it applies to both.
- Support your explanation with relevant company disclosures. Cite their locations and explain how you apply the accounting criteria.
Procedures for the new hire (2 points)
List the steps the new hire must perform when this topic arises. Identify the information to collect, the decision at each step, and the work required at each period-end.
Part 2: Scenario analysis (6 points)
Complete this part separately from the training note. Explain how the applicable accounting criteria apply to the supplied facts, and state your results. You may refer to the ASC paragraphs explained in Part 1 without repeating the full guidance discussion. Show calculations and journal entries in the matching workbook tab, and refer to that tab in your explanation.
Supplied facts
On March 1, a customer pays $120,000 for a product delivered that day and for 12 months of support that begins that day. The company also sells the product and the support separately. It assigns $84,000 of the price to the product and $36,000 to the support.
Required work
Explain how much revenue the company records on March 1 and for the period through December 31, and what liability it reports at December 31. Record the entries.
Current and noncurrent debt
Unit 3
Part 1: Training note (8 points)
Accounting guidance (3 points)
Research how a company classifies debt as current or noncurrent. Address contractual maturity, a covenant violation that permits the lender to demand payment, and long-term refinancing completed after year-end but before the statements are issued.
Identify the Accounting Standards Codification (ASC) paragraphs that answer these questions. Explain the requirements in your own words for the new hire, and cite the paragraphs you use.
Company accounting and peer comparison (3 points)
- Identify how your primary company and selected peer present current and noncurrent debt. Use disclosed terms to support your comparison.
- Compare your primary company with your selected peer. State whether their relevant policies, estimates, or reported treatments differ. Apply the accounting criteria to both companies and explain the effect on recognition, measurement, or timing. If they use the same treatment, explain why it applies to both.
- Support your explanation with relevant company disclosures. Cite their locations and explain how you apply the accounting criteria.
Procedures for the new hire (2 points)
List the steps the new hire must perform when this topic arises. Identify the information to collect, the decision at each step, and the work required at each period-end.
Part 2: Scenario analysis (6 points)
Complete this part separately from the training note. Explain how the applicable accounting criteria apply to the supplied facts, and state your results. You may refer to the ASC paragraphs explained in Part 1 without repeating the full guidance discussion. Show calculations and journal entries in the matching workbook tab, and refer to that tab in your explanation.
Supplied facts
At year-end the company has 3 notes. Note A is due in 8 months. Note B is due in 4 years, but the company violated a covenant at year-end. The lender may now demand payment and has not waived the violation. Note C is due in 5 months. After year-end and before the company issued its statements, it replaced Note C with a 5-year loan. The hypothetical company reports current assets of $1,500,000 and current liabilities of $1,000,000 before any reclassification of Note C. That liability total includes Note C of $100,000.
Required work
Classify each note as current or noncurrent and explain how its terms meet the applicable classification criteria. Using the supplied balances, compute the current ratio with Note C classified as current and with it classified as noncurrent. Hold current assets and all other balances constant. Explain why any ratio change does or does not represent a change in cash or total debt.
Inventory cost methods and measurement
Unit 5
Choose 1 of the 2 versions below. Complete both parts for that version only. Any one version counts as 1 topic toward your 5 topics. Choose a version available for your primary company and selected peer in the lookup.
- Version 1: LIFO and FIFO cost-flow analysis
- Version 2: FIFO or average-cost inventory: year-end measurement
Version 1: LIFO and FIFO cost-flow analysis
Use this version when your primary company or selected peer discloses the LIFO adjustments needed for the actual-company calculation.
Part 1: Training note (8 points)
Accounting guidance (3 points)
Research the inventory cost-flow guidance relevant to LIFO and FIFO. Explain how the difference between the two inventory bases relates to inventory at a reporting date and cost of goods sold for a period.
Identify the Accounting Standards Codification (ASC) paragraphs that answer these questions. Explain the requirements in your own words for the new hire, and cite the paragraphs you use.
Company accounting and peer comparison (3 points)
- Remove the disclosed LIFO adjustment from inventory and cost of goods sold for the company in your pair that uses LIFO. Identify the resulting cost basis from the company's disclosures. Do not label that basis FIFO unless the disclosures support it.
- Compare your primary company with your selected peer. State whether their relevant policies, estimates, or reported treatments differ. Apply the accounting criteria to both companies and explain the effect on recognition, measurement, or timing. If they use the same treatment, explain why it applies to both.
- Support your explanation with relevant company disclosures. Cite their locations and explain how you apply the accounting criteria.
Procedures for the new hire (2 points)
List the steps the new hire must perform when this topic arises. Identify the information to collect, the decision at each step, and the work required at each period-end.
Part 2: Scenario analysis (6 points)
Complete this part separately from the training note. Explain how the applicable accounting criteria apply to the supplied facts, and state your results. You may refer to the ASC paragraphs explained in Part 1 without repeating the full guidance discussion. Show calculations and journal entries in the matching workbook tab, and refer to that tab in your explanation.
Supplied facts
A company uses the last-in, first-out (LIFO) method. Its LIFO inventory is $400,000 at the start of the year and $460,000 at the end. The excess of first-in, first-out (FIFO) cost over LIFO cost is $50,000 at the start of the year and $80,000 at the end. Cost of goods sold is $2,000,000. An analyst is preparing a FIFO comparison. The analyst says the company must report FIFO amounts because its warehouse ships the oldest physical units first. The analyst also proposes adding $80,000 to ending inventory and subtracting $80,000 from current-year cost of goods sold.
Required work
Evaluate each of the analyst's conclusions using the inventory cost-flow guidance. Explain whether physical shipment order alone establishes the required accounting cost flow. Determine whether each proposed numerical adjustment is correct. Compute FIFO inventory at both dates and FIFO cost of goods sold. Reconcile the inventory and cost-of-goods-sold adjustments across the year, explaining which amounts concern a reporting date and which concern the current period. Distinguish the analyst's comparison from the company's reported LIFO amounts.
Version 2: FIFO or average-cost inventory: year-end measurement
Use this version when the inventory you analyze at your primary company uses FIFO or average cost. Identify that inventory population if the company uses more than 1 method.
Part 1: Training note (8 points)
Accounting guidance (3 points)
Research how a company measures FIFO or average-cost inventory when expected selling proceeds decline below cost. Explain which costs enter that comparison and how a later recovery in selling price affects a prior year-end reduction.
Identify the Accounting Standards Codification (ASC) paragraphs that answer these questions. Explain the requirements in your own words for the new hire, and cite the paragraphs you use.
Company accounting and peer comparison (3 points)
- Identify your primary company's inventory cost method and the measurement requirement that applies to the inventory population you analyze.
- Compare your primary company with your selected peer. State whether their relevant policies, estimates, or reported treatments differ. Apply the accounting criteria to both companies and explain the effect on recognition, measurement, or timing. If they use the same treatment, explain why it applies to both.
- Support your explanation with relevant company disclosures. Cite their locations and explain how you apply the accounting criteria.
Procedures for the new hire (2 points)
List the steps the new hire must perform when this topic arises. Identify the information to collect, the decision at each step, and the work required at each period-end.
Part 2: Scenario analysis (6 points)
Complete this part separately from the training note. Explain how the applicable accounting criteria apply to the supplied facts, and state your results. You may refer to the ASC paragraphs explained in Part 1 without repeating the full guidance discussion. Show calculations and journal entries in the matching workbook tab, and refer to that tab in your explanation.
Supplied facts
At year-end the company holds 3 products. Product A cost $90,000. Its expected selling price is $120,000, and its expected selling costs are $10,000. Product B cost $60,000. Its expected selling price is $55,000, and its expected selling costs are $5,000. Product C cost $40,000. Its expected selling price is $48,000, and its expected selling costs are $12,000. The hypothetical company uses FIFO for all 3 products.
Required work
Identify the measurement requirement applicable to the supplied FIFO inventory. Apply it to each product, record the entry, and determine the total year-end inventory balance. Explain how the facts support each treatment and what the company records if the selling price of a reduced product recovers in the next year.
Property, plant, and equipment: depreciation
Unit 6
Part 1: Training note (8 points)
Accounting guidance (3 points)
Research which equipment acquisition costs a company includes in the asset and which it expenses. Explain when depreciation begins, how the company determines depreciation, and how it accounts for a later change in estimated useful life.
Identify the Accounting Standards Codification (ASC) paragraphs that answer these questions. Explain the requirements in your own words for the new hire, and cite the paragraphs you use.
Company accounting and peer comparison (3 points)
- Identify your company's disclosed depreciation method and useful-life or rate range for equipment.
- Compare your primary company with your selected peer. State whether their relevant policies, estimates, or reported treatments differ. Apply the accounting criteria to both companies and explain the effect on recognition, measurement, or timing. If they use the same treatment, explain why it applies to both.
- Support your explanation with relevant company disclosures. Cite their locations and explain how you apply the accounting criteria.
Procedures for the new hire (2 points)
List the steps the new hire must perform when this topic arises. Identify the information to collect, the decision at each step, and the work required at each period-end.
Part 2: Scenario analysis (6 points)
Complete this part separately from the training note. Explain how the applicable accounting criteria apply to the supplied facts, and state your results. You may refer to the ASC paragraphs explained in Part 1 without repeating the full guidance discussion. Show calculations and journal entries in the matching workbook tab, and refer to that tab in your explanation.
Supplied facts
On July 1 the company pays $900,000 for equipment, $30,000 for delivery, and $20,000 for installation. It also pays $15,000 to train the operators. The equipment is ready for use on July 1. Management estimates a 5-year useful life and $50,000 residual value. Straight-line depreciation represents its expected pattern of use. The company reports on December 31 and uses a monthly convention. The accountant proposes including all $965,000 in equipment cost. On July 1, after 3 full years of use, management extends the estimated useful life by 2 years without changing the residual value. The accountant proposes revising the depreciation already reported in prior years to reflect the longer life.
Required work
Evaluate both proposed treatments using the applicable accounting requirements. Determine the equipment cost and any immediate expense, first-year depreciation, and carrying amount at December 31. Record the initial and first-year expense entries. For the later estimate change, determine the carrying amount at the change date and the depreciation for future full years. Explain whether the company revises amounts previously reported and why. Use the supplied method, estimates, and dates.
Intangible assets
Unit 7
Choose 1 of the 4 versions below. Complete both parts for that version only. Any one version counts as 1 topic toward your 5 topics. Choose a version available for your primary company and selected peer in the lookup.
- Version 1: Acquired intangibles: finite versus indefinite lives
- Version 2: Software developed for internal use
- Version 3: Software developed for customers
- Version 4: Research and development costs
Version 1: Acquired intangibles: finite versus indefinite lives
Part 1: Training note (8 points)
Accounting guidance (3 points)
Research how a company determines whether an acquired intangible asset has a finite or indefinite useful life. Explain the subsequent amortization, useful-life review, and impairment requirements that apply to each classification.
Identify the Accounting Standards Codification (ASC) paragraphs that answer these questions. Explain the requirements in your own words for the new hire, and cite the paragraphs you use.
Company accounting and peer comparison (3 points)
- Identify the intangible categories your primary company reports and determine which treatment applies to each. If your primary company does not report an example of one treatment, use an example from your selected peer. If neither company reports an example, state that and support your conclusion with their disclosures.
- Compare your primary company with your selected peer. State whether their relevant policies, estimates, or reported treatments differ. Apply the accounting criteria to both companies and explain the effect on recognition, measurement, or timing. If they use the same treatment, explain why it applies to both.
- Support your explanation with relevant company disclosures. Cite their locations and explain how you apply the accounting criteria.
Procedures for the new hire (2 points)
List the steps the new hire must perform when this topic arises. Identify the information to collect, the decision at each step, and the work required at each period-end.
Part 2: Scenario analysis (6 points)
Complete this part separately from the training note. Explain how the applicable accounting criteria apply to the supplied facts, and state your results. You may refer to the ASC paragraphs explained in Part 1 without repeating the full guidance discussion. Show calculations and journal entries in the matching workbook tab, and refer to that tab in your explanation.
Supplied facts
On January 1 the company buys 2 intangible assets. It pays $600,000 for a customer list that it expects to use for 6 years. It pays $400,000 for a trade name that it expects to use for as long as it operates, and no legal, contractual, or other limit applies.
Required work
Classify each asset's useful life as finite or indefinite and give the criteria. Record the entries for the first year. State what the company must do every year for the asset it does not amortize. Complete the analysis of both hypothetical assets.
Version 2: Software developed for internal use
Part 1: Training note (8 points)
Accounting guidance (3 points)
Research how a company accounts for costs of developing software for its own operations. Explain when capitalization begins, which development activities qualify, when amortization begins, and how the company determines amortization.
Identify the Accounting Standards Codification (ASC) paragraphs that answer these questions. Explain the requirements in your own words for the new hire, and cite the paragraphs you use.
Company accounting and peer comparison (3 points)
- Identify your company's internal-use software policy, disclosed amortization method and useful life or rate, and financial-statement presentation.
- Compare your primary company with your selected peer. State whether their relevant policies, estimates, or reported treatments differ. Apply the accounting criteria to both companies and explain the effect on recognition, measurement, or timing. If they use the same treatment, explain why it applies to both.
- Support your explanation with relevant company disclosures. Cite their locations and explain how you apply the accounting criteria.
Procedures for the new hire (2 points)
List the steps the new hire must perform when this topic arises. Identify the information to collect, the decision at each step, and the work required at each period-end.
Part 2: Scenario analysis (6 points)
Complete this part separately from the training note. Explain how the applicable accounting criteria apply to the supplied facts, and state your results. You may refer to the ASC paragraphs explained in Part 1 without repeating the full guidance discussion. Show calculations and journal entries in the matching workbook tab, and refer to that tab in your explanation.
Supplied facts
The company builds a scheduling tool for its central administrative office. It pays $200,000 to evaluate vendors and alternatives in January and February. On March 1 the preliminary evaluation is complete, management approves and funds development, and completion and intended use are probable. From March through September the company pays $1,260,000 for coding and testing. The tool is ready for use on October 1. Its estimated useful life is 5 years with no residual value, and its benefits are consumed evenly. The company reports on December 31 and uses a monthly convention.
Required work
Determine the treatment of each cost amount and explain how the activities and dates meet or fail the capitalization criteria. Identify the date capitalization begins and the date amortization begins, explaining why the dates serve different purposes. Compute first-year amortization and the year-end carrying amount using the supplied facts, and record the entries. Identify the asset and expense categories in which the hypothetical company reports these amounts, using the stated administrative purpose of the tool.
Version 3: Software developed for customers
Part 1: Training note (8 points)
Accounting guidance (3 points)
Research how a company accounts for costs of developing software to sell to customers. Explain the role of technological feasibility, when capitalization ends, and how the company subsequently amortizes capitalized costs.
Identify the Accounting Standards Codification (ASC) paragraphs that answer these questions. Explain the requirements in your own words for the new hire, and cite the paragraphs you use.
Company accounting and peer comparison (3 points)
- Identify your company's policy for software developed for customers, including when it capitalizes costs, how it amortizes them, and the income-statement line for amortization.
- Compare your primary company with your selected peer. State whether their relevant policies, estimates, or reported treatments differ. Apply the accounting criteria to both companies and explain the effect on recognition, measurement, or timing. If they use the same treatment, explain why it applies to both.
- Support your explanation with relevant company disclosures. Cite their locations and explain how you apply the accounting criteria.
Procedures for the new hire (2 points)
List the steps the new hire must perform when this topic arises. Identify the information to collect, the decision at each step, and the work required at each period-end.
Part 2: Scenario analysis (6 points)
Complete this part separately from the training note. Explain how the applicable accounting criteria apply to the supplied facts, and state your results. You may refer to the ASC paragraphs explained in Part 1 without repeating the full guidance discussion. Show calculations and journal entries in the matching workbook tab, and refer to that tab in your explanation.
Supplied facts
The company develops a software product to sell to customers. It does not prepare a detail program design. Management approves and funds the project on January 1. By March 31 a working model exists, but testing has not confirmed that it meets the product design specifications. On April 30 testing confirms that the completed working model meets those specifications. The company spends $300,000 before testing is completed on April 30 and $500,000 after April 30 until general release on September 1. These are development costs; the amounts exclude later maintenance and customer support. The accountant proposes capitalizing all $800,000 from January 1 because management approved the project and expects to recover its costs through sales.
Required work
Evaluate the accountant's proposed capitalization date and amount using the guidance for software developed for customers. Explain the significance of management approval, the untested working model, and the completed testing. Determine when the capitalization conditions are met, how each cost amount is treated, and the resulting correction to the accountant's proposal. Record the entries. Explain the subsequent amortization requirement without calculating an amount, since projected revenues and economic life are not supplied.
Version 4: Research and development costs
Part 1: Training note (8 points)
Accounting guidance (3 points)
Research how a company accounts for internal research and development costs. Address salaries, consumed materials, equipment with future uses on other projects, and equipment with no other use.
Identify the Accounting Standards Codification (ASC) paragraphs that answer these questions. Explain the requirements in your own words for the new hire, and cite the paragraphs you use.
Company accounting and peer comparison (3 points)
- State where your company reports this expense, and compute the expense as a percentage of your company's revenue for the 2 most recent fiscal years.
- Compare your primary company with your selected peer. State whether their relevant policies, estimates, or reported treatments differ. Apply the accounting criteria to both companies and explain the effect on recognition, measurement, or timing. If they use the same treatment, explain why it applies to both.
- Support your explanation with relevant company disclosures. Cite their locations and explain how you apply the accounting criteria.
Procedures for the new hire (2 points)
List the steps the new hire must perform when this topic arises. Identify the information to collect, the decision at each step, and the work required at each period-end.
Part 2: Scenario analysis (6 points)
Complete this part separately from the training note. Explain how the applicable accounting criteria apply to the supplied facts, and state your results. You may refer to the ASC paragraphs explained in Part 1 without repeating the full guidance discussion. Show calculations and journal entries in the matching workbook tab, and refer to that tab in your explanation.
Supplied facts
During the year the company spends $2,000,000 on a research project. It pays $1,200,000 in salaries and uses $300,000 of materials. On January 1 it buys equipment for $400,000 that it can use on later projects for 5 years. It also pays $100,000 for equipment built only for this project, which has no other use.
Required work
Compute the research and development expense for the year and any asset that remains at year-end. Record the entries and give the reason for each treatment.
Allowance for credit losses
Unit 4
Part 1: Training note (8 points)
Accounting guidance (3 points)
Research how a company estimates and records expected credit losses on receivables. Explain the allowance adjustment, a later write-off, and recovery of a previously written-off account, including their effects on income and net receivables.
Identify the Accounting Standards Codification (ASC) paragraphs that answer these questions. Explain the requirements in your own words for the new hire, and cite the paragraphs you use.
Company accounting and peer comparison (3 points)
- Identify and explain your company's disclosed method for estimating credit losses on receivables.
- Compare your primary company with your selected peer. State whether their relevant policies, estimates, or reported treatments differ. Apply the accounting criteria to both companies and explain the effect on recognition, measurement, or timing. If they use the same treatment, explain why it applies to both.
- Support your explanation with relevant company disclosures. Cite their locations and explain how you apply the accounting criteria.
Procedures for the new hire (2 points)
List the steps the new hire must perform when this topic arises. Identify the information to collect, the decision at each step, and the work required at each period-end.
Part 2: Scenario analysis (6 points)
Complete this part separately from the training note. Explain how the applicable accounting criteria apply to the supplied facts, and state your results. You may refer to the ASC paragraphs explained in Part 1 without repeating the full guidance discussion. Show calculations and journal entries in the matching workbook tab, and refer to that tab in your explanation.
Supplied facts
At year-end the company has receivables of $5,000,000, and its allowance has a credit balance of $40,000 before adjustment. The company expects to lose 1% of the $4,000,000 that is not yet due. It expects to lose 5% of the $800,000 that is 1 to 60 days past due. For the $200,000 more than 60 days past due, it expects a 30% loss. In the next year it writes off a $25,000 account and later collects $5,000 of that account.
Required work
Compute the required allowance. Record the year-end adjustment, the write-off, and the recovery. For each event, state its effect on income and net receivables.
Inventory write-downs and reserves
Unit 5
Choose 1 of the 2 versions below. Complete both parts for that version only. Any one version counts as 1 topic toward your 5 topics. Choose a version available for your primary company and selected peer in the lookup.
- Version 1: Inventory write-down and later sale
- Version 2: Year-end inventory write-down proposals
Version 1: Inventory write-down and later sale
Part 1: Training note (8 points)
Accounting guidance (3 points)
Research how a company measures excess or obsolete FIFO inventory and records a required reduction. Explain the resulting cost basis and the accounting when it later sells the reduced inventory.
Identify the Accounting Standards Codification (ASC) paragraphs that answer these questions. Explain the requirements in your own words for the new hire, and cite the paragraphs you use.
Company accounting and peer comparison (3 points)
- State your company's policy for excess and obsolete inventory and where its reserve or charge appears.
- Compare your primary company with your selected peer. State whether their relevant policies, estimates, or reported treatments differ. Apply the accounting criteria to both companies and explain the effect on recognition, measurement, or timing. If they use the same treatment, explain why it applies to both.
- Support your explanation with relevant company disclosures. Cite their locations and explain how you apply the accounting criteria.
Procedures for the new hire (2 points)
List the steps the new hire must perform when this topic arises. Identify the information to collect, the decision at each step, and the work required at each period-end.
Part 2: Scenario analysis (6 points)
Complete this part separately from the training note. Explain how the applicable accounting criteria apply to the supplied facts, and state your results. You may refer to the ASC paragraphs explained in Part 1 without repeating the full guidance discussion. Show calculations and journal entries in the matching workbook tab, and refer to that tab in your explanation.
Supplied facts
The company holds parts that cost $500,000. It expects to sell parts that cost $400,000 at normal prices. For the remaining parts, the expected selling price is $30,000, and the expected selling costs are $5,000. The hypothetical company uses FIFO for this inventory.
Required work
Compute the reduction and record it. State the cost basis of the reduced parts afterward. Explain what the company records if it later sells those parts for $45,000.
Version 2: Year-end inventory write-down proposals
Part 1: Training note (8 points)
Accounting guidance (3 points)
Research how a company measures and records a loss on FIFO inventory when expected selling proceeds decline. Explain the costs considered in the measurement and the effect on inventory and income.
Identify the Accounting Standards Codification (ASC) paragraphs that answer these questions. Explain the requirements in your own words for the new hire, and cite the paragraphs you use.
Company accounting and peer comparison (3 points)
- Name the income-statement line where your company reports inventory losses. Compute a gross profit rate using its disclosed revenue and cost of sales. Identify the scope of those amounts and explain your selection.
- Compare your primary company with your selected peer. State whether their relevant policies, estimates, or reported treatments differ. Apply the accounting criteria to both companies and explain the effect on recognition, measurement, or timing. If they use the same treatment, explain why it applies to both.
- Support your explanation with relevant company disclosures. Cite their locations and explain how you apply the accounting criteria.
Procedures for the new hire (2 points)
List the steps the new hire must perform when this topic arises. Identify the information to collect, the decision at each step, and the work required at each period-end.
Part 2: Scenario analysis (6 points)
Complete this part separately from the training note. Explain how the applicable accounting criteria apply to the supplied facts, and state your results. You may refer to the ASC paragraphs explained in Part 1 without repeating the full guidance discussion. Show calculations and journal entries in the matching workbook tab, and refer to that tab in your explanation.
Supplied facts
The company discontinues a product line. The remaining inventory cost $300,000. Its expected selling price at year-end is $120,000, and its expected selling costs are $20,000. The hypothetical company uses FIFO for this inventory.
Proposals to evaluate
- Manager 1: Record no loss at year-end. Continue reporting inventory at $300,000. Wait until the inventory is sold to recognize any loss. The manager argues that no loss should be recorded before the sale or payment of selling costs.
- Manager 2: Record a $180,000 loss at year-end. Reduce inventory from $300,000 to the expected selling price of $120,000. The manager excludes the $20,000 of expected selling costs from the calculation.
Required work
Evaluate both proposals; you are not required to accept either one. For each proposal, explain whether its timing and measurement comply with the applicable guidance and why. Determine the correct year-end inventory balance and loss, and record the required entry. For each proposal, calculate any overstatement or understatement of year-end inventory and current-year income relative to your conclusion.
Goodwill: acquisitions and impairment
Unit 7
Choose 1 of the 2 versions below. Complete both parts for that version only. Any one version counts as 1 topic toward your 5 topics. Choose a version available for your primary company and selected peer in the lookup.
- Version 1: Goodwill at acquisition
- Version 2: Goodwill impairment at reporting units
Version 1: Goodwill at acquisition
Part 1: Training note (8 points)
Accounting guidance (3 points)
Research how an acquirer determines goodwill in a business combination. Explain how it measures identifiable assets and liabilities, including an intangible asset the acquired business did not previously record. Explain the subsequent accounting for goodwill.
Identify the Accounting Standards Codification (ASC) paragraphs that answer these questions. Explain the requirements in your own words for the new hire, and cite the paragraphs you use.
Company accounting and peer comparison (3 points)
- Use your company's stated policy to explain what it does with goodwill in later years.
- Compare your primary company with your selected peer. State whether their relevant policies, estimates, or reported treatments differ. Apply the accounting criteria to both companies and explain the effect on recognition, measurement, or timing. If they use the same treatment, explain why it applies to both.
- Support your explanation with relevant company disclosures. Cite their locations and explain how you apply the accounting criteria.
Procedures for the new hire (2 points)
List the steps the new hire must perform when this topic arises. Identify the information to collect, the decision at each step, and the work required at each period-end.
Part 2: Scenario analysis (6 points)
Complete this part separately from the training note. Explain how the applicable accounting criteria apply to the supplied facts, and state your results. You may refer to the ASC paragraphs explained in Part 1 without repeating the full guidance discussion. Show calculations and journal entries in the matching workbook tab, and refer to that tab in your explanation.
Supplied facts
The company pays $900,000 in cash for all of another business. That business's own records list assets of $500,000 and liabilities of $200,000. At fair value its identifiable assets are $700,000, which includes a $150,000 customer list that its records do not list, and its liabilities are $200,000.
Required work
Compute goodwill and record the acquisition. Explain why the company records the customer list separately and why it does not use the amounts in the acquired business's records.
Version 2: Goodwill impairment at reporting units
Part 1: Training note (8 points)
Accounting guidance (3 points)
Research when and at what level a company tests goodwill for impairment. Explain how it measures the loss and whether the goodwill assigned to a reporting unit limits that loss.
Identify the Accounting Standards Codification (ASC) paragraphs that answer these questions. Explain the requirements in your own words for the new hire, and cite the paragraphs you use.
Company accounting and peer comparison (3 points)
- Use your company's stated policy to explain when it performs this test and at what level.
- Compare your primary company with your selected peer. State whether their relevant policies, estimates, or reported treatments differ. Apply the accounting criteria to both companies and explain the effect on recognition, measurement, or timing. If they use the same treatment, explain why it applies to both.
- Support your explanation with relevant company disclosures. Cite their locations and explain how you apply the accounting criteria.
Procedures for the new hire (2 points)
List the steps the new hire must perform when this topic arises. Identify the information to collect, the decision at each step, and the work required at each period-end.
Part 2: Scenario analysis (6 points)
Complete this part separately from the training note. Explain how the applicable accounting criteria apply to the supplied facts, and state your results. You may refer to the ASC paragraphs explained in Part 1 without repeating the full guidance discussion. Show calculations and journal entries in the matching workbook tab, and refer to that tab in your explanation.
Supplied facts
The company tests 2 reporting units. Unit 1 has a carrying amount of $2,000,000, which includes goodwill of $300,000, and a fair value of $1,800,000. Unit 2 has a carrying amount of $1,500,000, which includes goodwill of $100,000, and a fair value of $1,300,000.
Required work
Compute the goodwill impairment loss for each unit and record the entries. Explain why the 2 losses differ although the shortfall is the same.
Loss contingencies
Unit 3
Part 1: Training note (8 points)
Accounting guidance (3 points)
Research when a company records a loss contingency and when it discloses one. Address probability, an estimated loss range with no better estimate, and inability to estimate the amount.
Identify the Accounting Standards Codification (ASC) paragraphs that answer these questions. Explain the requirements in your own words for the new hire, and cite the paragraphs you use.
Company accounting and peer comparison (3 points)
- Select 1 loss-contingency matter in your primary company's annual report. Explain its reported treatment using disclosed facts about probability and estimability, and identify facts the filing does not provide. If the primary company does not disclose enough information for this analysis, use a matter from your selected peer. Identify which company reports the matter.
- Compare your primary company with your selected peer. State whether their relevant policies, estimates, or reported treatments differ. Apply the accounting criteria to both companies and explain the effect on recognition, measurement, or timing. If they use the same treatment, explain why it applies to both.
- Support your explanation with relevant company disclosures. Cite their locations and explain how you apply the accounting criteria.
Procedures for the new hire (2 points)
List the steps the new hire must perform when this topic arises. Identify the information to collect, the decision at each step, and the work required at each period-end.
Part 2: Scenario analysis (6 points)
Complete this part separately from the training note. Explain how the applicable accounting criteria apply to the supplied facts, and state your results. You may refer to the ASC paragraphs explained in Part 1 without repeating the full guidance discussion. Show calculations and journal entries in the matching workbook tab, and refer to that tab in your explanation.
Supplied facts
At year-end the company faces 3 claims. For Claim A, the company's lawyers conclude that a loss is probable and estimate it at $2,000,000 to $5,000,000. No amount in that range is more likely than another. For Claim B, they conclude that a loss of $1,000,000 is reasonably possible. For Claim C, they conclude that a loss is probable but cannot estimate the amount.
Required work
State what the company records and what it discloses for each claim, and record any required entry.
Long-lived assets: impairment and sale
Unit 6
Choose 1 of the 2 versions below. Complete both parts for that version only. Any one version counts as 1 topic toward your 5 topics. Choose a version available for your primary company and selected peer in the lookup.
- Version 1: Impairment of assets the company will keep using
- Version 2: Classification and measurement of assets held for sale
Version 1: Impairment of assets the company will keep using
Part 1: Training note (8 points)
Accounting guidance (3 points)
Research how a company tests long-lived assets it will continue using for impairment and measures any loss. Explain the testing level, subsequent depreciation, and treatment of a later recovery in fair value.
Identify the Accounting Standards Codification (ASC) paragraphs that answer these questions. Explain the requirements in your own words for the new hire, and cite the paragraphs you use.
Company accounting and peer comparison (3 points)
- Identify a disclosed long-lived-asset impairment event at your primary company or selected peer. Explain the reported treatment using the applicable impairment criteria and identify any relevant facts the filing does not provide. Identify which company reports the event.
- Compare your primary company with your selected peer. State whether their relevant policies, estimates, or reported treatments differ. Apply the accounting criteria to both companies and explain the effect on recognition, measurement, or timing. If they use the same treatment, explain why it applies to both.
- Support your explanation with relevant company disclosures. Cite their locations and explain how you apply the accounting criteria.
Procedures for the new hire (2 points)
List the steps the new hire must perform when this topic arises. Identify the information to collect, the decision at each step, and the work required at each period-end.
Part 2: Scenario analysis (6 points)
Complete this part separately from the training note. Explain how the applicable accounting criteria apply to the supplied facts, and state your results. You may refer to the ASC paragraphs explained in Part 1 without repeating the full guidance discussion. Show calculations and journal entries in the matching workbook tab, and refer to that tab in your explanation.
Supplied facts
The company loses a major customer and tests 2 machines that it will keep using. Machine 1 has a carrying amount of $800,000, expected undiscounted future cash flows of $700,000, and a fair value of $550,000. Machine 2 has a carrying amount of $400,000, expected undiscounted future cash flows of $450,000, and a fair value of $350,000.
Required work
Apply the test to each machine, compute any loss, and record the entry. State the amount the company depreciates afterward and what it records if the fair value later recovers.
Version 2: Classification and measurement of assets held for sale
Part 1: Training note (8 points)
Accounting guidance (3 points)
Research the criteria for classifying a long-lived asset as held for sale. Explain its measurement at classification and the effect of classification on depreciation.
Identify the Accounting Standards Codification (ASC) paragraphs that answer these questions. Explain the requirements in your own words for the new hire, and cite the paragraphs you use.
Company accounting and peer comparison (3 points)
- Identify a disclosed sale at your primary company or selected peer. Explain the reported classification and measurement. Identify which classification criteria you can support with disclosed facts and which facts the filing does not provide. Identify which company reports the sale.
- Compare your primary company with your selected peer. State whether their relevant policies, estimates, or reported treatments differ. Apply the accounting criteria to both companies and explain the effect on recognition, measurement, or timing. If they use the same treatment, explain why it applies to both.
- Support your explanation with relevant company disclosures. Cite their locations and explain how you apply the accounting criteria.
Procedures for the new hire (2 points)
List the steps the new hire must perform when this topic arises. Identify the information to collect, the decision at each step, and the work required at each period-end.
Part 2: Scenario analysis (6 points)
Complete this part separately from the training note. Explain how the applicable accounting criteria apply to the supplied facts, and state your results. You may refer to the ASC paragraphs explained in Part 1 without repeating the full guidance discussion. Show calculations and journal entries in the matching workbook tab, and refer to that tab in your explanation.
Supplied facts
On October 1 management approves a plan to sell a building and begins to look for a buyer. The building can be sold in its present condition, and a sale within 1 year is probable. Its carrying amount is $1,200,000, its fair value is $1,000,000, and the costs to sell are $60,000. Depreciation had been $5,000 each month. The company is actively marketing the building at an asking price of $1,000,000. Management has no plans to change or withdraw the sale, and its actions are consistent with completing it.
Required work
State the criteria the building must meet to be classified as held for sale, the amount the company reports for it, and the loss. Record the entry and state what happens to depreciation after October 1.
Product warranties
Unit 3
Part 1: Training note (8 points)
Accounting guidance (3 points)
Research how a company accounts for an assurance warranty and a separately sold extended warranty. Explain the timing of expense or revenue recognition and how claims paid affect the assurance-warranty liability.
Identify the Accounting Standards Codification (ASC) paragraphs that answer these questions. Explain the requirements in your own words for the new hire, and cite the paragraphs you use.
Company accounting and peer comparison (3 points)
- Use your company's warranty reconciliation to compute its disclosed warranty provision as a percentage of revenue. Identify the line or lines you use and explain what that measure includes.
- Compare your primary company with your selected peer. State whether their relevant policies, estimates, or reported treatments differ. Apply the accounting criteria to both companies and explain the effect on recognition, measurement, or timing. If they use the same treatment, explain why it applies to both.
- Support your explanation with relevant company disclosures. Cite their locations and explain how you apply the accounting criteria.
Procedures for the new hire (2 points)
List the steps the new hire must perform when this topic arises. Identify the information to collect, the decision at each step, and the work required at each period-end.
Part 2: Scenario analysis (6 points)
Complete this part separately from the training note. Explain how the applicable accounting criteria apply to the supplied facts, and state your results. You may refer to the ASC paragraphs explained in Part 1 without repeating the full guidance discussion. Show calculations and journal entries in the matching workbook tab, and refer to that tab in your explanation.
Supplied facts
During the year the company sells products for $10,000,000 with a 2-year assurance warranty. It expects warranty costs equal to 2% of those sales. The warranty liability was $150,000 at the start of the year, and the company pays $170,000 for claims during the year. The company also sells separate extended warranties for $300,000 that cover the third and fourth years.
Required work
Record the entries for the year and compute the ending warranty liability. Explain why the company treats the extended warranties differently.
Before you submit
- Check your topic selection against the required groups and use an existing peer for each note.
- Check that each topic includes the three training-note sections and a separate scenario analysis.
- Check that the workbook contains the calculations and entries referenced in the report.
- Verify the company facts and amounts, source citations, and formulas. Correct any errors carried forward from the midpoint.
- Include your AI-use statement in the report.
- Remove your name, student ID, and other personal identifying information from both files and their filenames.
- Upload the report and Excel workbook to D2L. Open both submitted files and confirm that they are the correct, complete versions. You are responsible for checking your uploads. I will grade the files you submit.
AI use
In your report, state whether you used an AI tool. If you did, name the tool and describe its contribution. If you did not use an AI tool, state that explicitly.
The disclosure earns no points. If you omit it, 1 point will be deducted from your final company analysis score. You remain responsible for every number, source, ASC citation, and conclusion. Your grade is based on the submitted work, regardless of whether you used AI.
See the syllabus for course policies.