Unit 5 · Chapter 16

Inventory cost methods and reported performance

About 30 minutes to read

Listen to this chapter

Work in progress

These materials change during the semester. Report an error or an unclear passage.

1 hr 15 min Listen on YouTube Download the MP3 (51.5 MB) 36 chapters Download the transcript

Transcript Includes practice answers
  1. 0:04 You are listening to Chapter 16 of the A C C 300 course reading:
  2. 0:10 inventory cost methods and reported performance.
  3. 0:14 Follow Second Helping through cost assignment and reported ratios.
  4. 0:19 Facet Jewelers supplies a separate specific-identification example.
  5. 0:24 Pause at each question before hearing its explanation.
  6. 0:28 All company amounts are fictional teaching inputs in United States dollars.
  7. 0:34 A retailer can buy the same product at different prices during a month.
  8. 0:39 When it sells part of that inventory, it must assign some of the available
  9. 0:43 cost to the sale.
  10. 0:45 The rest remains in inventory.
  11. 0:48 The quantity sold does not, by itself, establish which costs become expense.
  12. 0:54 In Chapter 15, Second Helping's inventory examples used a uniform unit cost.
  13. 1:01 We could multiply the quantity by that cost.
  14. 1:04 Here, we keep the distinction between goods sold and goods remaining, but
  15. 1:08 introduce different acquisition costs.
  16. 1:11 You will calculate how the company assigns those costs and interpret the
  17. 1:16 resulting profit and inventory measures.
  18. 1:19 Amounts are in US dollars.
  19. 1:20 Each new case states its period and assumptions; no balance carries forward
  20. 1:26 from Chapter 15 unless expressly identified.
  21. 1:30 Refresher.
  22. 1:32 Review periodic and perpetual entries in Chapter 15 if you need to review how
  23. 1:37 each system records inventory transactions.
  24. 1:42 Assign the cost of an identified item.
  25. 1:46 Specific identification assigns the actual recorded cost of a particular item
  26. 1:52 to its sale.
  27. 1:54 The company retains records connecting that item to its acquisition cost.
  28. 1:59 The method is useful when the items are individually distinct, such as
  29. 2:05 diamonds with different characteristics and grading reports.
  30. 2:09 Consider a separate company, Facet Jewelers.
  31. 2:13 Its December 2026 inventory contains these individually documented stones.
  32. 2:19 Each letter identifies a particular stone and its attached grading report, not
  33. 2:25 a category of diamonds.
  34. 2:27 Stone, A;
  35. 2:30 Identifying description, Round diamond with its own grading report;
  36. 2:35 Acquisition cost, 2,400 dollars.
  37. 2:39 Stone, B;
  38. 2:42 Identifying description, Emerald-cut diamond with its own grading report;
  39. 2:47 Acquisition cost, 3,700 dollars.
  40. 2:52 Stone, C;
  41. 2:53 Identifying description, Pear-shaped diamond with its own grading report;
  42. 2:59 Acquisition cost, 5,100 dollars.
  43. 3:03 Facet sells stones A and C.
  44. 3:06 Their costs become cost of goods sold: 2,400 dollars plus 5,100 dollars equals
  45. 3:14 7,500 dollars.
  46. 3:17 Facet started with diamonds costing 11,200 dollars.
  47. 3:22 It sold stones A and C, so their 7,500 dollars cost became cost of goods sold.
  48. 3:29 Unsold stone B remains an inventory asset at its 3,700 dollars cost.
  49. 3:36 Facet uses the costs of the stones actually sold.
  50. 3:39 It cannot choose different stones' costs merely to report a preferred profit.
  51. 3:45 Check your understanding.
  52. 3:46 Facet sells stone B instead.
  53. 3:50 Which cost becomes expense?
  54. 3:53 Pause to answer.
  55. 3:55 Stone B cost 3,700 dollars.
  56. 3:59 The company traces the actual cost of that identified stone, rather than
  57. 4:04 averaging the stones or choosing the oldest invoice.
  58. 4:09 Assign costs to interchangeable goods.
  59. 4:13 Second Helping sells interchangeable casserole dishes.
  60. 4:17 A customer buying the same model receives the same product regardless of the
  61. 4:21 retailer's purchase date.
  62. 4:23 The company nevertheless may have paid different prices for those dishes.
  63. 4:28 A cost-flow assumption specifies which acquisition costs become expense and
  64. 4:34 which remain in inventory.
  65. 4:36 It does not prescribe which physical dish a warehouse employee selects.
  66. 4:42 Under Accounting Standards Codification (ASC) A S C Topic 330, Subtopic 10,
  67. 4:49 Section 30,
  68. 4:51 paragraphs 9 through 11, accepted assumptions include first in, first out,
  69. 4:56 average cost, and last in, first out.
  70. 5:00 The company uses first in, first out, last in, first out, or average cost to
  71. 5:06 assign costs to goods sold and goods remaining.
  72. 5:10 Under perpetual records, it assigns costs at each sale.
  73. 5:14 Under periodic records, it assigns costs through a period-end calculation.
  74. 5:20 Under both systems, the company recognizes sales revenue when control of the
  75. 5:25 goods transfers to the customer.
  76. 5:27 These methods also apply to a manufacturer's finished goods.
  77. 5:31 A retailer's inventory cost comes from purchasing merchandise;
  78. 5:36 a manufacturer's finished-goods cost comes from materials, labor, and
  79. 5:41 manufacturing overhead.
  80. 5:43 Once production is complete, the manufacturer uses first in, first out, last
  81. 5:48 in, first out, or average cost to assign those costs between goods sold and
  82. 5:53 goods remaining.
  83. 5:56 Purchases before the only sale.
  84. 6:00 Use a separate November 2026 product example with no beginning inventory.
  85. 6:07 The stated unit costs include all acquisition costs.
  86. 6:11 There are no returns,
  87. 6:14 shortages, freight adjustments, or write-downs.
  88. 6:17 Date, November 2;
  89. 6:21 Transaction, Buy 12 dishes at 20 dollars per dish;
  90. 6:26 Acquisition cost, 240 dollars.
  91. 6:30 Date,
  92. 6:31 November 10;
  93. 6:33 Transaction, Buy 8 dishes at 30 dollars per dish;
  94. 6:38 Acquisition cost, 240 dollars.
  95. 6:42 Date,
  96. 6:44 November 15;
  97. 6:45 Transaction,
  98. 6:47 Sell 6 dishes;
  99. 6:49 Acquisition cost, Assigned below.
  100. 6:53 Available inventory is 20 dishes costing 480 dollars.
  101. 7:00 After the sale, 14 dishes remain.
  102. 7:05 We must assign the available cost between the sold and remaining dishes.
  103. 7:12 Second Helping makes both purchases before selling any dishes.
  104. 7:17 Periodic and perpetual calculations therefore produce the same result for each
  105. 7:23 method.
  106. 7:24 That agreement depends on these transaction dates.
  107. 7:29 We will change the sale date after comparing the cost methods.
  108. 7:34 First in, first out assigns the earliest available costs to goods sold.
  109. 7:42 A cost layer is a quantity of units carried at a particular unit cost.
  110. 7:48 Here, the earliest layer contains 12 dishes at 20 dollars per dish.
  111. 7:54 The sale uses only part of that layer: 6 dishes times 20 dollars per dish
  112. 8:00 equals 120 dollars cost of goods sold.
  113. 8:04 The remaining inventory contains 6 dishes at 20 dollars per dish and 8 dishes
  114. 8:10 at 30 dollars per dish.
  115. 8:13 Its cost is 360 dollars.
  116. 8:16 The oldest costs entered expense, so the more recent costs remain in
  117. 8:21 inventory.
  118. 8:23 The first in, first out diagram assigns the earliest costs to the six dishes
  119. 8:28 sold.
  120. 8:30 Six dishes at 20 dollars become 120 dollars of cost of goods sold.
  121. 8:36 Six older dishes remain at 20 dollars, along with eight newer dishes at 30
  122. 8:41 dollars.
  123. 8:42 Their combined ending inventory cost is 360 dollars.
  124. 8:48 Shading marks costs assigned to expense, not particular physical dishes
  125. 8:52 shipped.
  126. 8:54 Check your understanding.
  127. 8:56 What cost does first in, first out assign if Second Helping sells another dish
  128. 9:02 before buying more?
  129. 9:04 Pause to answer.
  130. 9:05 Twenty dollars.
  131. 9:08 Six dishes remain in the earlier cost layer, so those costs are assigned
  132. 9:13 before the newer 30-dollar costs.
  133. 9:17 Last in, first out assigns the latest available costs to goods sold.
  134. 9:24 For this sale, the latest layer contains 8 dishes at 30 dollars per dish.
  135. 9:31 Both purchases have already occurred.
  136. 9:33 6 dishes times 30 dollars per dish equals 180 dollars cost of goods sold.
  137. 9:42 Ending inventory costs 300 dollars.
  138. 9:46 Second Helping sold the same quantity as under first in, first out.
  139. 9:52 It reports a different expense because it assigns the later, higher
  140. 9:56 acquisition costs to the sale.
  141. 9:59 The last in, first out diagram assigns the latest costs to the six dishes
  142. 10:05 sold.
  143. 10:07 Six dishes at 30 dollars become 180 dollars of expense.
  144. 10:13 Two dishes remain at 30 dollars, and twelve remain at 20 dollars.
  145. 10:19 Ending inventory therefore costs 300 dollars.
  146. 10:23 The physical quantity is unchanged; the assigned costs differ.
  147. 10:29 Check your understanding.
  148. 10:31 Would physically selecting the oldest dishes prevent last in, first out?
  149. 10:38 Pause to answer.
  150. 10:40 No.
  151. 10:42 last in, first out assigns costs.
  152. 10:45 It need not describe which physical dishes leave the warehouse.
  153. 10:49 The quantity records still have to reconcile.
  154. 10:54 Average cost.
  155. 10:55 Weighted-average cost divides available cost by available units.
  156. 11:03 Each unit contributes to the calculation, so a larger purchase receives more
  157. 11:09 weight than a smaller purchase.
  158. 11:11 Divide the 480-dollar available cost by twenty dishes.
  159. 11:18 The weighted-average cost is 24 dollars per dish.
  160. 11:23 6 dishes times 24 dollars per dish equals 144 dollars cost of goods sold.
  161. 11:33 Ending inventory costs 336 dollars.
  162. 11:38 At the 24-dollar average, six sold dishes become 144 dollars of cost of goods
  163. 11:46 sold.
  164. 11:47 The fourteen remaining dishes carry 336 dollars.
  165. 11:52 Together, expense and ending inventory account for all 480 dollars of
  166. 11:59 available cost.
  167. 12:01 Under every method,
  168. 12:03 cost of goods sold plus ending inventory equals the original 480 dollars cost:
  169. 12:12 Method, first in, first out;
  170. 12:16 Cost of goods sold, 120 dollars; Ending inventory,
  171. 12:21 360 dollars.
  172. 12:25 Method, last in, first out;
  173. 12:28 Cost of goods sold, 180 dollars; Ending inventory,
  174. 12:34 300 dollars.
  175. 12:37 Method,
  176. 12:38 Average cost; Cost of goods sold, 144 dollars; Ending inventory,
  177. 12:46 336 dollars.
  178. 12:49 For unchanged sales revenue, the higher expense under last in, first out means
  179. 12:56 lower gross profit.
  180. 12:58 No method changed the quantity purchased, the quantity sold, or the amount
  181. 13:03 paid to suppliers in this example.
  182. 13:06 Check your understanding.
  183. 13:09 Why is the weighted average below the simple midpoint of the two purchase
  184. 13:13 prices?
  185. 13:15 Pause to answer.
  186. 13:17 More dishes were purchased at the lower price.
  187. 13:21 The calculation weights each price by its quantity, rather than treating both
  188. 13:26 purchases as equal-sized groups.
  189. 13:30 Selling before the next purchase.
  190. 13:33 Now change only the first sale date, from November 15 to November 6.
  191. 13:41 The purchases,
  192. 13:42 unit costs, and quantity sold remain unchanged.
  193. 13:47 The retailer now sells the dishes before making its second purchase.
  194. 13:53 The transaction timeline starts with twelve dishes purchased November 2 at 20
  195. 13:59 dollars each.
  196. 14:01 Six sell November 6, leaving six.
  197. 14:05 The November 10 purchase adds eight dishes at 30 dollars, bringing quantity to
  198. 14:11 fourteen.
  199. 14:12 Every cost method and system must account for that same quantity.
  200. 14:19 Periodic: assign costs at month-end.
  201. 14:24 Under periodic accounting, Second Helping calculates cost of goods sold at the
  202. 14:29 November close.
  203. 14:31 It purchased 20 dishes costing 480 dollars, sold 6, and has 14 remaining.
  204. 14:39 Those quantities and costs are unchanged even though the sale now occurs on
  205. 14:45 November 6.
  206. 14:47 Periodic method, first in, first out;
  207. 14:51 Cost of goods sold, 6 dishes times 20 dollars = 120 dollars; Ending inventory,
  208. 15:01 480 dollars minus 120 dollars = 360 dollars.
  209. 15:09 Periodic method,
  210. 15:11 last in, first out; Cost of goods sold, 6 dishes times 30 dollars = 180
  211. 15:20 dollars; Ending inventory,
  212. 15:24 480 dollars minus 180 dollars = 300 dollars.
  213. 15:32 Periodic method,
  214. 15:34 Weighted average;
  215. 15:36 Cost of goods sold, 6 dishes times 24 dollars = 144 dollars; Ending inventory,
  216. 15:46 480 dollars minus 144 dollars = 336 dollars.
  217. 15:55 The periodic weighted average remains:
  218. 15:59 Periodic weighted average divides the full month's 480 dollars by all twenty
  219. 16:06 dishes available.
  220. 16:08 The result is 24 dollars per dish.
  221. 16:12 Periodic last in, first out uses the November 10 purchase costs because the
  222. 16:19 company assigns costs at month-end using all purchases made during November.
  223. 16:26 At the November close,
  224. 16:28 periodic first in, first out assigns six 20-dollar costs to the sale.
  225. 16:35 Expense is 120 dollars and ending inventory is 360 dollars.
  226. 16:41 Periodic last in, first out instead assigns six 30-dollar costs.
  227. 16:48 Expense is 180 dollars and ending inventory is 300 dollars.
  228. 16:53 The month-end last in, first out calculation includes the November 10
  229. 16:59 purchase, although the physical sale occurred November 6.
  230. 17:04 Perpetual:
  231. 17:06 assign costs at each sale.
  232. 17:10 Under perpetual accounting, the company assigns costs when it records the
  233. 17:14 November 6 sale.
  234. 17:16 At that date, only the first purchase is available.
  235. 17:20 Each method assigns 20 dollars per dish, making the sale's cost 120 dollars.
  236. 17:27 On November 6, Second Helping has purchased only the 20 dollars dishes, so
  237. 17:33 each dish sold adds 20 dollars to cost of goods sold.
  238. 17:37 Under a perpetual system, the November 6 sale can use only the November 2
  239. 17:43 purchase.
  240. 17:45 All three methods assign six dishes at 20 dollars, or 120 dollars, to expense.
  241. 17:52 Six dishes costing 120 dollars remain.
  242. 17:55 The later purchase has not occurred.
  243. 17:59 Compare periodic and perpetual costs for the November 6 sale.
  244. 18:06 Method,
  245. 18:07 first in, first out;
  246. 18:10 Periodic cost of goods sold, 120 dollars; Perpetual cost of goods sold,
  247. 18:17 120 dollars.
  248. 18:20 Method, last in, first out;
  249. 18:24 Periodic cost of goods sold, 180 dollars; Perpetual cost of goods sold,
  250. 18:31 120 dollars.
  251. 18:32 Method,
  252. 18:36 Average cost;
  253. 18:38 Periodic cost of goods sold,
  254. 18:40 144 dollars; Perpetual cost of goods sold,
  255. 18:46 120 dollars.
  256. 18:48 Under perpetual last in, first out,
  257. 18:52 latest means the latest available costs at the time of that sale.
  258. 18:59 Under periodic last in, first out, the assignment uses the period's available
  259. 19:04 costs.
  260. 19:06 That difference explains the last in, first out results above without changing
  261. 19:11 the meaning of the cost method.
  262. 19:14 Check your understanding.
  263. 19:16 Can perpetual last in, first out use November 10 costs for the November 6
  264. 19:22 sale?
  265. 19:24 Pause to answer.
  266. 19:26 No.
  267. 19:27 A perpetual calculation uses only costs available at that sale.
  268. 19:33 Periodic last in, first out assigns costs later, at the month's close.
  269. 19:40 Perpetual:
  270. 19:42 record the November 10 purchase.
  271. 19:45 The November 10 purchase adds eight dishes costing 240 dollars.
  272. 19:52 The six dishes already held cost 120 dollars.
  273. 19:58 Total inventory is now fourteen dishes costing 360 dollars.
  274. 20:04 The 120 dollars already assigned to the earlier sale stays in expense.
  275. 20:12 After the November 10 purchase,
  276. 20:15 inventory contains two purchase costs.
  277. 20:18 At the next sale,
  278. 20:20 first in, first out,
  279. 20:22 last in, first out, and moving average can assign different costs.
  280. 20:28 Perpetual moving average:
  281. 20:30 calculate the next sale cost.
  282. 20:34 Continue the revised timeline.
  283. 20:36 On November 18, Second Helping sells another 5 dishes.
  284. 20:40 No further transactions occur during November.
  285. 20:44 This adds a transaction to the revised case; it does not replace the first
  286. 20:49 sale.
  287. 20:51 Under perpetual average cost, called moving average, the company recalculates
  288. 20:57 the average after each purchase.
  289. 21:00 A sale removes units and cost at the average then in effect.
  290. 21:05 The sale itself does not change that unit average.
  291. 21:09 After each purchase,
  292. 21:11 calculate the new average using the inventory still on hand and the goods just
  293. 21:16 purchased:
  294. 21:17 To calculate a new moving average, add the cost of inventory still held to the
  295. 21:24 new purchase cost.
  296. 21:27 Divide by the combined remaining and purchased units.
  297. 21:32 Use the remaining inventory cost, after subtracting the costs of earlier
  298. 21:37 sales.
  299. 21:38 Then multiply the units in the next sale by this new average to calculate cost
  300. 21:45 of goods sold.
  301. 21:46 The November 2 purchase cost 240 dollars.
  302. 21:51 The November 6 sale removed 120 dollars of that cost:
  303. 21:56 The November 6 sale reduced the initial 240 dollars of inventory by 120
  304. 22:05 dollars.
  305. 22:06 The remaining inventory cost is 120 dollars.
  306. 22:12 The sale also reduced the quantity from 12 dishes to 6.
  307. 22:19 The first sale assigns six 20-dollar costs, or 120 dollars, to expense.
  308. 22:28 Six dishes with a combined cost of 120 dollars remain available for the next
  309. 22:34 purchase calculation.
  310. 22:36 On November 10, Second Helping buys 8 more dishes for 240 dollars.
  311. 22:44 Calculate the new average from the remaining inventory and this purchase:
  312. 22:50 Add 120 dollars of remaining inventory to the 240 dollars purchase.
  313. 22:58 Divide the combined 360 dollars by fourteen dishes.
  314. 23:04 The new moving average is about 25.71 dollars per dish.
  315. 23:12 Retain the unrounded average for the next calculation.
  316. 23:16 The two dated groups contain six dishes costing 120 dollars and eight costing
  317. 23:23 240 dollars.
  318. 23:26 Moving average combines those costs into a 360-dollar pool for fourteen
  319. 23:32 dishes.
  320. 23:34 Purchase dates no longer select the cost assigned to the next sale.
  321. 23:39 On November 18,
  322. 23:41 Second Helping sells 5 dishes.
  323. 23:45 Multiply that quantity by the new average to calculate cost of goods sold:
  324. 23:52 At the unrounded moving average,
  325. 23:55 selling five dishes on November 18 assigns 128.57 dollars to cost of goods
  326. 24:03 sold, rounded to cents.
  327. 24:06 Subtract the sale's cost from the 360 dollars available after the November 10
  328. 24:13 purchase:
  329. 24:14 Subtract the 128.57 dollars assigned to the sale from the 360 dollars pool.
  330. 24:24 Ending inventory is 231.43 dollars.
  331. 24:30 After the November 18 sale, nine dishes remain at the current moving average.
  332. 24:37 Their total recorded cost is 231.43 dollars.
  333. 24:43 The sale's cost is 128.57 dollars.
  334. 24:50 Both amounts reconcile to the prior 360 dollars inventory balance.
  335. 24:56 Transaction, November 6 sale;
  336. 25:00 Cost assigned to the sale, 120 dollars; Inventory cost after transaction,
  337. 25:08 120 dollars.
  338. 25:11 Transaction,
  339. 25:13 November 10 purchase;
  340. 25:16 Cost assigned to the sale, No sale occurs;
  341. 25:21 Inventory cost after transaction,
  342. 25:23 360 dollars.
  343. 25:27 Transaction,
  344. 25:28 November 18 sale;
  345. 25:32 Cost assigned to the sale, 128.57 dollars; Inventory cost after transaction,
  346. 25:41 231.43 dollars.
  347. 25:47 Check your understanding.
  348. 25:49 Does this sale require another average calculation?
  349. 25:54 Pause to answer.
  350. 25:56 No.
  351. 25:57 Apply the average from the last purchase.
  352. 26:00 The sale removes quantity and cost proportionately.
  353. 26:05 Recalculate when a later purchase changes the mix.
  354. 26:10 Compare periodic weighted average with perpetual moving average.
  355. 26:17 Calculate the periodic weighted-average cost per unit using beginning
  356. 26:22 inventory and all purchases during the period:
  357. 26:26 Periodic weighted-average unit cost equals beginning inventory cost plus
  358. 26:32 purchase cost, divided by beginning inventory units plus units purchased.
  359. 26:39 It uses the entire period's available goods.
  360. 26:44 Second Helping has no beginning inventory.
  361. 26:48 At the November close, its goods available for sale consist of the two
  362. 26:53 purchases:
  363. 26:56 For this month,
  364. 26:58 divide 480 dollars by twenty dishes to obtain 24 dollars per dish.
  365. 27:06 Apply that average to all 11 dishes sold during November:
  366. 27:12 Inventory system and method,
  367. 27:15 Periodic weighted average;
  368. 27:18 November cost of goods sold,
  369. 27:21 11 dishes times 24 dollars = 264 dollars.
  370. 27:28 The November 10 purchase raises the periodic average applied to all November
  371. 27:34 sales.
  372. 27:36 Under perpetual moving average, Second Helping uses the average available at
  373. 27:41 each sale.
  374. 27:43 The November 6 sale occurs before the higher-cost purchase, so its cost
  375. 27:49 remains 120 dollars.
  376. 27:52 Add the costs recorded for the two sales:
  377. 27:56 Inventory system and method,
  378. 27:59 Perpetual moving average;
  379. 28:03 November cost of goods sold,
  380. 28:05 120 dollars + 128.57 dollars = 248.57 dollars.
  381. 28:17 Perpetual last in, first out:
  382. 28:21 assign costs at each sale.
  383. 28:24 Use the same revised timeline, including the November 18 sale.
  384. 28:29 Under perpetual last in, first out, the November 6 sale already cost 120
  385. 28:36 dollars.
  386. 28:38 The November 6 perpetual sale assigns six dishes at 20 dollars, or 120
  387. 28:45 dollars, to expense.
  388. 28:48 Six dishes costing 120 dollars remain.
  389. 28:52 After the November 10 purchase,
  390. 28:55 inventory contains 6 dishes at 20 dollars and 8 dishes at 30 dollars per dish.
  391. 29:03 Before the next perpetual last in, first out sale,
  392. 29:09 inventory consists of six November 2 dishes at 20 dollars and eight November
  393. 29:15 10 dishes at 30 dollars.
  394. 29:18 Together they cost 360 dollars.
  395. 29:22 The November 18 sale uses 5 dishes from the latest available layer: 5 dishes
  396. 29:29 times 30 dollars per dish equals 150 dollars.
  397. 29:35 Total perpetual last in, first out cost of goods sold is 270 dollars.
  398. 29:42 The remaining layers contain 6 dishes at 20 dollars and 3 dishes at 30 dollars
  399. 29:48 per dish, totaling 210 dollars.
  400. 29:52 The November 18 perpetual last in, first out sale assigns five of the latest
  401. 29:59 30-dollar costs to expense.
  402. 30:02 Cost of goods sold is 150 dollars.
  403. 30:06 Three 30-dollar costs and six 20-dollar costs remain, for ending inventory of
  404. 30:12 210 dollars.
  405. 30:15 Periodic last in, first out:
  406. 30:19 assign costs at month-end.
  407. 30:22 Under periodic last in, first out, assign costs to all 11 dishes sold at
  408. 30:28 month-end.
  409. 30:29 Use the entire latest purchase first, then enough of the earlier purchase to
  410. 30:34 complete the sold quantity.
  411. 30:36 This produces cost of goods sold of 300 dollars and ending inventory of 180
  412. 30:42 dollars.
  413. 30:44 first in, first out:
  414. 30:46 compare perpetual and periodic costs.
  415. 30:51 Perpetual first in, first out.
  416. 30:54 Under perpetual first in, first out, both sales use the earliest remaining
  417. 31:00 costs.
  418. 31:01 The second sale still fits within the first purchase layer, so it costs 100
  419. 31:06 dollars.
  420. 31:07 Total expense is 220 dollars.
  421. 31:11 The remaining inventory costs 260 dollars.
  422. 31:16 Periodic first in, first out assigns the same earliest costs to the period's
  423. 31:21 sold quantity.
  424. 31:22 For these ordinary purchases and sales, first in, first out produces the same
  425. 31:28 ending amounts under either system.
  426. 31:31 Average cost and last in, first out can differ when purchases and sales are
  427. 31:36 interspersed.
  428. 31:38 Compare all methods and systems for November.
  429. 31:43 The completed November case has 11 dishes sold and 9 remaining.
  430. 31:49 Every row below reconciles to the same 480 dollars available cost.
  431. 31:56 Method and system,
  432. 31:58 first in, first out, either system;
  433. 32:02 Cost of goods sold, 220 dollars; Ending inventory, 260 dollars.
  434. 32:10 Method and system,
  435. 32:12 Periodic weighted average;
  436. 32:15 Cost of goods sold, 264 dollars; Ending inventory, 216 dollars.
  437. 32:23 Method and system,
  438. 32:26 Perpetual moving average;
  439. 32:28 Cost of goods sold, 248.57 dollars; Ending inventory, 231.43 dollars.
  440. 32:40 Method and system,
  441. 32:42 Periodic last in, first out;
  442. 32:45 Cost of goods sold, 300 dollars; Ending inventory, 180 dollars.
  443. 32:52 Method and system,
  444. 32:55 Perpetual last in, first out; Cost of goods sold, 270 dollars; Ending
  445. 33:02 inventory, 210 dollars.
  446. 33:05 Check your understanding.
  447. 33:08 Why do inventory dollars differ when the physical count is identical?
  448. 33:14 Pause to answer.
  449. 33:17 The count establishes the owned quantity.
  450. 33:21 The cost method and inventory system determine which acquisition costs remain
  451. 33:27 assigned to that quantity.
  452. 33:30 Interpret the reported profit.
  453. 33:34 Gross profit equals sales revenue less cost of goods sold.
  454. 33:40 Suppose Second Helping sells every dish in the completed November case for 48
  455. 33:46 dollars.
  456. 33:47 Revenue is 528 dollars under every method.
  457. 33:53 Method and system, first in, first out, either system;
  458. 33:58 Sales revenue, 528 dollars; Less: cost of goods sold, 220 dollars; Gross
  459. 34:07 profit, 308 dollars.
  460. 34:11 Method and system,
  461. 34:13 Periodic weighted average;
  462. 34:16 Sales revenue, 528 dollars; Less: cost of goods sold, 264 dollars; Gross
  463. 34:24 profit, 264 dollars.
  464. 34:29 Method and system,
  465. 34:31 Perpetual moving average;
  466. 34:34 Sales revenue, 528 dollars; Less: cost of goods sold, 248.57 dollars; Gross
  467. 34:43 profit, 279.43 dollars.
  468. 34:48 Method and system,
  469. 34:50 Periodic last in, first out;
  470. 34:53 Sales revenue, 528 dollars; Less: cost of goods sold, 300 dollars; Gross
  471. 35:02 profit, 228 dollars.
  472. 35:06 Method and system,
  473. 35:08 Perpetual last in, first out;
  474. 35:11 Sales revenue, 528 dollars; Less: cost of goods sold, 270 dollars; Gross
  475. 35:19 profit, 258 dollars.
  476. 35:23 first in, first out produces higher profit here because purchase prices rose
  477. 35:29 and first in, first out assigned the earlier, lower costs to expense.
  478. 35:35 The company did not sell more dishes or charge more under first in, first out.
  479. 35:41 A comparison of profit must distinguish a change in cost assignment from a
  480. 35:47 change in selling prices, sales volume, or purchase costs.
  481. 35:51 What if purchase prices fell instead?
  482. 35:55 Imagine Second Helping buys 12 dishes at 30 dollars each, then 8 dishes at 20
  483. 36:01 dollars each.
  484. 36:02 It sells 6 dishes after both purchases, at the same selling price under either
  485. 36:07 method.
  486. 36:09 Which method would now produce the higher gross profit?
  487. 36:13 first in, first out assigns the earlier 30 dollars cost to each dish sold,
  488. 36:18 making cost of goods sold 180 dollars.
  489. 36:23 last in, first out assigns the later 20 dollars cost, making cost of goods
  490. 36:27 sold 120 dollars.
  491. 36:30 last in, first out assigns the most recent purchase costs to the sale.
  492. 36:35 Because those costs are lower here, cost of goods sold is lower and gross
  493. 36:40 profit is higher.
  494. 36:42 Under first in, first out, ending inventory retains the most recent purchase
  495. 36:47 costs.
  496. 36:49 last in, first out can retain much older costs, although perpetual last in,
  497. 36:54 first out may also leave newer costs from later purchases.
  498. 36:58 Both methods use acquisition costs, which may differ from what the company
  499. 37:02 would pay to replace the inventory today.
  500. 37:07 Read the cost policy before comparing companies.
  501. 37:12 Under United States generally accepted accounting principles, A S C Topic 330,
  502. 37:18 Subtopic 10, Section 30, paragraph 9 permits first in, first out, average
  503. 37:26 cost, and last in, first out.
  504. 37:28 A S C Topic 330, Subtopic 10, Section 50, paragraph 1 requires consistent
  505. 37:37 application and disclosure of the inventory basis.
  506. 37:41 A company does not freely switch methods each year to obtain a preferred
  507. 37:46 profit.
  508. 37:48 Read the inventory composition as well as the method.
  509. 37:52 A retailer's merchandise and a manufacturer's total inventory contain
  510. 37:57 different stages of goods.
  511. 38:00 International financial reporting standards differ.
  512. 38:03 International Accounting Standard (IAS) 2,
  513. 38:07 paragraphs 23 and 25, uses specific identification for specified
  514. 38:13 noninterchangeable items and first in, first out or weighted average for other
  515. 38:19 inventory.
  516. 38:20 last in, first out is not permitted.
  517. 38:23 An international financial reporting standards company's inventory therefore
  518. 38:27 cannot be assumed comparable to a US company's last in, first out inventory
  519. 38:32 without adjustment.
  520. 38:34 See the international financial reporting standards Foundation's IAS 2 page.
  521. 38:40 Refresher.
  522. 38:42 Chapter 15 explains how inventory costs move through the operating cycle and
  523. 38:48 become cost of goods sold.
  524. 38:51 Calculate inventory turnover and days.
  525. 38:56 A company commits money to inventory before it sells the goods.
  526. 39:01 Managers need enough inventory to fill orders, but holding goods adds storage
  527. 39:06 costs and the risk of damage or obsolescence.
  528. 39:10 Inventory turnover and days in inventory help managers assess how quickly
  529. 39:16 goods sell relative to the inventory the company holds.
  530. 39:20 Inventory turnover estimates how many times a company sells an amount of
  531. 39:25 inventory equal to its average stock during a period.
  532. 39:29 Higher turnover means goods are selling faster relative to the amount kept on
  533. 39:33 hand.
  534. 39:35 Lower turnover can indicate slower sales or a buildup of stock.
  535. 39:40 In some business contexts, turnover means sales revenue.
  536. 39:45 Inventory turnover measures something different: how many times the company
  537. 39:49 sold an amount equal to its average inventory.
  538. 39:52 Because inventory is recorded at cost, we also measure the goods sold at cost.
  539. 39:59 Using sales revenue would count the selling markup as though it were
  540. 40:02 additional inventory sold.
  541. 40:05 Inventory turnover equals cost of goods sold divided by average inventory
  542. 40:11 cost.
  543. 40:13 Both amounts use cost, not selling prices.
  544. 40:17 Here, we estimate average inventory using the beginning and ending balances.
  545. 40:24 We add those 2 balances and divide by 2:
  546. 40:29 With beginning and ending balances,
  547. 40:33 average inventory cost equals their sum divided by two.
  548. 40:39 A company may build inventory before a busy season and sell most of it before
  549. 40:45 year-end.
  550. 40:47 Beginning and ending balances can miss the higher inventory held during that
  551. 40:52 season.
  552. 40:53 More frequent observations, such as monthly balances, can better reflect
  553. 40:58 inventory held throughout the period.
  554. 41:01 For balances taken at regular intervals, add the balances and divide by the
  555. 41:06 number of inventory balances included in the calculation:
  556. 41:11 With more frequent observations, add the observed inventory cost balances and
  557. 41:17 divide by the number of observations.
  558. 41:21 Choose observations that represent the period's inventory holdings.
  559. 41:26 The denominator counts balances, not periods.
  560. 41:30 For example, averaging 12 month-end balances means dividing by 12.
  561. 41:36 State which balances you use.
  562. 41:39 Days in inventory estimates how long the company holds goods before selling
  563. 41:44 them, on average.
  564. 41:46 Fewer days mean a shorter holding period;
  565. 41:50 more days mean money remains committed to inventory longer.
  566. 41:55 Use the number of days in the reporting period and the unrounded turnover
  567. 42:00 result:
  568. 42:01 Days in inventory equals the number of days in the period divided by inventory
  569. 42:08 turnover.
  570. 42:11 Compare annual amounts under periodic methods.
  571. 42:15 On January 1, 2027,
  572. 42:19 Second Helping has inventory costing 20,000 dollars.
  573. 42:23 All beginning inventory units have the same unit cost, so the beginning
  574. 42:28 balance is the same under every method.
  575. 42:32 During 2027, Second Helping purchases 70,000 dollars of merchandise and earns
  576. 42:39 120,000 dollars in sales revenue.
  577. 42:42 The supplied year-end cost assignments below describe the same physical goods
  578. 42:48 and sales under alternative periodic methods.
  579. 42:52 There are no shortages or write-downs.
  580. 42:55 Use beginning and ending inventory to calculate the average, and use 365 days
  581. 43:01 for the year.
  582. 43:03 Amount, Beginning inventory;
  583. 43:06 first in, first out, 20,000 dollars; Weighted average, 20,000 dollars; last
  584. 43:16 in, first out, 20,000 dollars.
  585. 43:21 Amount, Ending inventory; first in, first out, 22,000 dollars; Weighted
  586. 43:31 average, 19,000 dollars; last in, first out, 16,000 dollars.
  587. 43:41 In the annual comparison,
  588. 43:43 beginning inventory is 20,000 dollars and purchases are 70,000 dollars.
  589. 43:50 first in, first out ending inventory is 22,000 dollars, leaving 68,000 dollars
  590. 43:57 of expense.
  591. 44:00 Weighted average leaves 19,000 dollars in inventory and 71,000 dollars in
  592. 44:06 expense.
  593. 44:07 last in, first out leaves 16,000 dollars in inventory and 74,000 dollars in
  594. 44:14 expense.
  595. 44:14 Beginning-and-ending average inventory is 21,000 dollars for first in, first
  596. 44:22 out, 19,500 for weighted average, and 18,000 for last in, first out.
  597. 44:31 Dividing expense by those averages gives turnover of about 3.24, 3.64, and
  598. 44:38 4.11 times, respectively.
  599. 44:42 Using 365 days gives about 112.7, 100.2, and 88.8 days in inventory.
  600. 44:53 Physical activity is identical.
  601. 44:56 Cost assignment changes the reported measures.
  602. 44:59 The days calculation uses inventory cost and cost of goods sold directly to
  603. 45:06 avoid rounding turnover first.
  604. 45:08 It is equivalent to dividing days in the period by inventory turnover.
  605. 45:14 Under first in, first out, Second Helping's turnover of 3.24 means it sold
  606. 45:21 about 3.24 times the amount it typically held in inventory, measured at cost.
  607. 45:28 The 112.7-day estimate suggests that goods remain in inventory for roughly
  608. 45:35 that long before sale.
  609. 45:38 Managers can compare these measures with prior years and similar retailers to
  610. 45:43 investigate changes in purchasing or sales.
  611. 45:47 last in, first out produces higher turnover and fewer days in inventory than
  612. 45:52 first in, first out or weighted average in this example.
  613. 45:56 Its cost of goods sold is higher, while its average inventory cost is lower.
  614. 46:02 Physical sales and inventory quantities are unchanged, so these differences do
  615. 46:07 not establish faster selling or better inventory management.
  616. 46:11 Higher turnover and fewer days in inventory can indicate that a company is
  617. 46:17 selling goods faster while holding less inventory.
  618. 46:20 But holding less inventory helps only if the company can still fill customer
  619. 46:25 orders.
  620. 46:26 If inventory falls because the company cannot obtain enough goods, turnover
  621. 46:31 may rise even as it loses sales.
  622. 46:34 To judge whether the increase is an improvement, consider why inventory fell
  623. 46:39 and whether the company can meet customer demand.
  624. 46:43 Check your understanding.
  625. 46:45 Can you combine last in, first out expense with first in, first out average
  626. 46:51 inventory for comparison?
  627. 46:54 Pause to answer.
  628. 46:56 No.
  629. 46:58 Use a consistent cost basis for the numerator and denominator.
  630. 47:03 Adjust expense and both inventory balances before calculating the comparison.
  631. 47:10 Use total inventory for a manufacturer-wide comparison.
  632. 47:15 You can calculate inventory turnover for any span of time, such as a week, 6
  633. 47:21 weeks, a month, or a year.
  634. 47:24 Use cost of goods sold and average inventory for that same span.
  635. 47:30 Compare turnover over periods of equal length, while considering seasonal
  636. 47:35 differences.
  637. 47:36 To calculate days in inventory, use the actual number of days in the chosen
  638. 47:42 period.
  639. 47:42 Homefield Advantage Athletics manufactures baseball gloves and uses first in,
  640. 47:49 first out.
  641. 47:51 Its December 2027 cost of goods sold is 1,960 dollars.
  642. 47:58 For its inventory turnover, include raw materials, work in process, and
  643. 48:04 finished goods:
  644. 48:05 Inventory, Raw materials;
  645. 48:09 December 1, 410 dollars; December 31,
  646. 48:14 530 dollars.
  647. 48:17 Inventory, Work in process;
  648. 48:21 December 1, 620 dollars; December 31,
  649. 48:27 740 dollars.
  650. 48:29 Inventory, Finished goods;
  651. 48:33 December 1, 770 dollars; December 31,
  652. 48:39 630 dollars.
  653. 48:42 Inventory, Total inventory;
  654. 48:46 December 1, 1,800 dollars; December 31, 1,900 dollars.
  655. 48:54 Average total inventory is 1,850 dollars.
  656. 49:00 Dividing December cost of goods sold of 1,960 dollars by that average gives
  657. 49:07 1.06 times during December.
  658. 49:11 This is a monthly measure, not annual turnover.
  659. 49:15 Using only finished goods gives an average of 700 dollars and turnover of 2.80
  660. 49:22 for the same month.
  661. 49:23 Finished-goods turnover excludes raw materials and work in process from
  662. 49:29 average inventory.
  663. 49:29 Its smaller denominator produces a higher turnover ratio than total-inventory
  664. 49:35 turnover for the same company.
  665. 49:38 Comparing one manufacturer's finished-goods turnover with another's
  666. 49:42 total-inventory turnover could therefore suggest a difference in selling speed
  667. 49:46 that comes from which inventory accounts were included.
  668. 49:50 Check your understanding.
  669. 49:53 Why does using only Homefield's Finished Goods produce a higher turnover
  670. 49:58 ratio?
  671. 50:00 Pause to answer.
  672. 50:02 Expense is unchanged, but the denominator excludes Raw Materials and Work in
  673. 50:09 Process.
  674. 50:10 The higher ratio does not mean the company sold more gloves.
  675. 50:16 Distinguish reported profit from taxable income.
  676. 50:22 The annual comparison uses financial-reporting amounts.
  677. 50:27 A difference in reported cost of goods sold does not, by itself, establish a
  678. 50:33 difference in taxable income.
  679. 50:35 The company must calculate taxable income under tax rules before estimating a
  680. 50:41 tax effect.
  681. 50:43 Suppose a separate tax calculation establishes that Second Helping's taxable
  682. 50:48 income would be 6,000 dollars lower under last in, first out than under first
  683. 50:54 in, first out.
  684. 50:55 If that income would otherwise be taxed at 25 percent, with no other tax
  685. 51:01 effects, the reduction in current income tax owed would be: 6,000 dollars
  686. 51:07 reduction in taxable income times 25 percent equals 1,500 dollars reduction in
  687. 51:15 current tax owed.
  688. 51:16 This calculation uses an assumed difference in taxable income, not the
  689. 51:22 difference in financial-statement expense alone.
  690. 51:25 It does not calculate total income tax expense for the financial statements,
  691. 51:29 which can also include deferred taxes.
  692. 51:34 Qualifying to use last in, first out for taxes.
  693. 51:39 To use last in, first out for US federal income taxes, a company generally
  694. 51:45 must also use last in, first out when reporting annual income to owners and
  695. 51:51 lenders.
  696. 51:52 This is the last in, first out conformity requirement under Internal Revenue
  697. 51:57 Code section 472(c) and Treasury Regulation section 1.472-2, paragraph E).
  698. 52:07 When rising costs make last in, first out income lower than first in, first
  699. 52:12 out income, the company cannot use last in, first out for taxes while
  700. 52:17 presenting first in, first out income as its primary annual income figure to
  701. 52:23 owners or lenders.
  702. 52:24 It can provide a first in, first out comparison as supplemental information if
  703. 52:29 it follows the regulation's disclosure requirements.
  704. 52:34 The Internal Revenue Service's last in, first out conformity guidance
  705. 52:38 describes the permitted supplemental reporting.
  706. 52:42 Use a last in, first out reserve for a comparable basis.
  707. 52:48 A last in, first out reserve is a disclosed difference between the last in,
  708. 52:53 first out carrying amount and another stated inventory basis.
  709. 52:59 Read the company's definition before assuming the comparison basis is first
  710. 53:03 in, first out.
  711. 53:05 For companies subject to Regulation S-X (including publicly traded companies
  712. 53:10 and companies registering a public securities offering), Rule 5-02(6)(c)
  713. 53:17 addresses disclosure of material replacement or current cost in excess of
  714. 53:23 stated last in, first out value.
  715. 53:27 See the reserve in the remaining cost layers.
  716. 53:32 In Second Helping's first example, both purchases occur before the November 15
  717. 53:38 sale.
  718. 53:39 After that sale, 14 dishes remain under either method.
  719. 53:44 first in, first out assigns those dishes 360 dollars of cost;
  720. 53:50 last in, first out assigns them 300 dollars.
  721. 53:54 The reserve diagram compares the same fourteen dishes.
  722. 54:00 first in, first out assigns 360 dollars to them;
  723. 54:05 last in, first out assigns 300 dollars.
  724. 54:08 The 60-dollar reserve equals the difference.
  725. 54:13 Six costs differ by ten dollars each.
  726. 54:17 Outlined portions belong to the existing purchase layers; they are not
  727. 54:21 additional purchases.
  728. 54:24 The other portions have the same assigned costs under both methods.
  729. 54:29 The 60 dollars reserve is the cost difference for the outlined 6 dishes.
  730. 54:35 It does not represent additional goods.
  731. 54:38 Use the disclosed annual reserve.
  732. 54:42 A company reports the following inventory amounts in its 2027 financial
  733. 54:47 statements.
  734. 54:48 Its inventory note defines the reserve as first in, first out inventory minus
  735. 54:55 last in, first out inventory.
  736. 54:58 All inventory is included in that comparison, and there are no other
  737. 55:03 reconciling items.
  738. 55:05 Amount, Reported last in, first out inventory;
  739. 55:10 January 1, 2027, 40,000 dollars; December 31, 2027, 48,000 dollars.
  740. 55:22 Amount,
  741. 55:23 first in, first out-minus-last in, first out reserve;
  742. 55:30 January 1, 2027, 6,000 dollars; December 31, 2027, 9,000 dollars.
  743. 55:41 Amount,
  744. 55:42 Inventory on a first in, first out basis;
  745. 55:46 January 1, 2027, 46,000 dollars; December 31, 2027, 57,000 dollars.
  746. 55:57 Add each reserve to the last in, first out inventory balance at the same date.
  747. 56:04 To see how these balances affect cost of goods sold,
  748. 56:08 compare the inventory accounts.
  749. 56:11 The company reports last in, first out cost of goods sold of 156,000 dollars.
  750. 56:19 We can calculate purchases from its reported last in, first out balances:
  751. 56:25 Purchases equal expense plus ending inventory minus beginning inventory.
  752. 56:33 Add 156,000 dollars and 48,000 dollars, then subtract 40,000 dollars.
  753. 56:42 Purchases are 164,000 dollars.
  754. 56:46 Both accounts include those same purchases.
  755. 56:51 Beginning inventory and purchases are debits;
  756. 56:55 the cost of goods sold leaves inventory as a credit.
  757. 57:00 Under last in, first out, the Inventory account starts with 40,000 dollars.
  758. 57:08 Purchases add 164,000, expense removes 156,000, and 48,000 remains.
  759. 57:19 Under first in, first out, the same purchases combine with 46,000 dollars of
  760. 57:25 beginning inventory.
  761. 57:27 Expense is 153,000 dollars and ending inventory is 57,000 dollars.
  762. 57:35 Both accounts reconcile independently.
  763. 57:38 To convert reported last in, first out cost of goods sold to first in, first
  764. 57:45 out, adjust both inventory balances.
  765. 57:49 The cost of goods sold calculation adds beginning inventory and subtracts
  766. 57:55 ending inventory:
  767. 57:56 To convert last in, first out expense to first in, first out, add the
  768. 58:02 6,000-dollar beginning reserve because first in, first out starts with more
  769. 58:08 inventory cost.
  770. 58:11 Subtract the 9,000-dollar ending reserve because first in, first out retains
  771. 58:16 more cost at year-end.
  772. 58:19 We can express the same adjustments using the change in the last in, first out
  773. 58:25 reserve.
  774. 58:27 Adding the beginning reserve and subtracting the ending reserve is equivalent
  775. 58:32 to subtracting the increase in the reserve:
  776. 58:36 first in, first out cost of goods sold equals last in, first out cost of goods
  777. 58:43 sold minus the change in the reserve.
  778. 58:47 Subtract the 3,000-dollar increase in the reserve from 156,000 dollars.
  779. 58:54 first in, first out expense is 153,000 dollars.
  780. 59:00 Calculate the change as ending reserve minus beginning reserve.
  781. 59:07 If the reserve decreases,
  782. 59:09 subtracting the negative change adds the decrease to last in, first out cost
  783. 59:14 of goods sold.
  784. 59:16 Adjust the measures to compare with companies using first in, first out.
  785. 59:21 Suppose you want to compare this company with a similar business that reports
  786. 59:25 inventory under first in, first out.
  787. 59:28 Use the first in, first out-adjusted cost of goods sold and inventory balances
  788. 59:33 to calculate this company's measures on the same inventory cost basis.
  789. 59:38 The company has annual sales revenue of 260,000 dollars.
  790. 59:44 Use the same beginning-and-ending average convention and 365 days.
  791. 59:50 The reported last in, first out basis uses 156,000 dollars of expense and
  792. 59:58 average inventory of 44,000 dollars.
  793. 1:00:02 Gross profit is 104,000 dollars, or 40 percent of 260,000 dollars in revenue.
  794. 1:00:11 Turnover is about 3.55 times and days are about 102.9.
  795. 1:00:19 After converting to first in, first out,
  796. 1:00:23 expense is 153,000 dollars and average inventory is 51,500 dollars.
  797. 1:00:32 Gross profit becomes 107,000 dollars, or about 41.15 percent of revenue.
  798. 1:00:41 Turnover falls to about 2.97 times, and days rise to about 122.9.
  799. 1:00:49 These differences reflect the cost basis, with the same purchases and sales.
  800. 1:00:55 You can now compare the adjusted first in, first out measures with those of
  801. 1:01:01 the business using first in, first out without mixing inventory cost methods.
  802. 1:01:08 Differences in product mix, seasonality,
  803. 1:01:12 purchasing, and customer demand can still affect that comparison.
  804. 1:01:17 These calculations do not change the company's accounting records; it
  805. 1:01:21 continues to report under last in, first out.
  806. 1:01:24 Check your understanding.
  807. 1:01:27 Why not subtract the ending reserve from this year's expense?
  808. 1:01:32 Pause to answer.
  809. 1:01:34 The reserve includes differences accumulated before this year.
  810. 1:01:40 The current expense adjustment uses its change, so both beginning and ending
  811. 1:01:45 reserves are needed.
  812. 1:01:48 Identify a last in, first out liquidation effect.
  813. 1:01:54 last in, first out liquidation occurs when a reduction in inventory draws on
  814. 1:02:00 older last in, first out cost layers.
  815. 1:02:05 The expense includes those historical costs.
  816. 1:02:09 If they are below current costs, reported gross profit can rise even though
  817. 1:02:14 the company has not improved its selling prices or current purchase costs.
  818. 1:02:20 Consider a separate Second Helping periodic last in, first out case for 2028.
  819. 1:02:28 Beginning inventory contains 40 dishes at 18 dollars per dish.
  820. 1:02:33 The company buys 70 dishes at 27 dollars per dish and sells 85 dishes at 45
  821. 1:02:40 dollars each.
  822. 1:02:41 No other transactions occur.
  823. 1:02:44 Current purchases do not cover all units sold.
  824. 1:02:48 The sale uses 15 units from the older layer.
  825. 1:02:52 Cost assigned, Current purchases;
  826. 1:02:56 Calculation, 70 dishes times 27 dollars per dish;
  827. 1:03:01 Expense, 1,890 dollars.
  828. 1:03:06 Cost assigned, Older layer;
  829. 1:03:09 Calculation,
  830. 1:03:11 15 dishes times 18 dollars per dish;
  831. 1:03:15 Expense, 270 dollars.
  832. 1:03:18 Cost assigned, Total cost of goods sold;
  833. 1:03:23 Calculation,
  834. 1:03:25 Current costs plus older costs;
  835. 1:03:28 Expense, 2,160 dollars.
  836. 1:03:32 The 25 unsold dishes make up ending inventory, with a total cost of 450
  837. 1:03:40 dollars.
  838. 1:03:41 To see how the older layer affects cost of goods sold,
  839. 1:03:46 suppose all 85 dishes sold had cost the current purchase price of 27 dollars
  840. 1:03:51 each.
  841. 1:03:53 Compare that amount with the reported last in, first out cost of goods sold:
  842. 1:03:59 Using the current purchase price for every dish,
  843. 1:04:03 85 dishes at $27 cost $2,295.
  844. 1:04:10 Reported expense combines $1,890 from current purchases and $270 from older
  845. 1:04:18 costs, totaling $2,160.
  846. 1:04:22 The difference between $2,295 and $2,160 is $135.
  847. 1:04:32 That reduction in expense comes from releasing older costs.
  848. 1:04:37 Sales revenue is 3,825 dollars.
  849. 1:04:43 Reported gross profit is 1,665 dollars, compared with 1,530 dollars using the
  850. 1:04:53 stated current-cost benchmark.
  851. 1:04:55 The 135 dollars difference arises because the 15 dishes from the older layer
  852. 1:05:01 cost 18 dollars each, below the current purchase price of 27 dollars.
  853. 1:05:07 Those lower costs reduce cost of goods sold and increase gross profit;
  854. 1:05:14 sales revenue is unchanged.
  855. 1:05:16 The profit effect need not be favorable.
  856. 1:05:19 If the current-cost benchmark were 14 dollars per dish instead, the same older
  857. 1:05:25 costs would exceed it.
  858. 1:05:27 The released older units would reduce gross profit by 60 dollars relative to
  859. 1:05:32 that lower benchmark.
  860. 1:05:33 A decline in a disclosed reserve does not, by itself, prove liquidation.
  861. 1:05:40 Price changes and the inventory mix can also affect the difference between
  862. 1:05:44 cost bases.
  863. 1:05:46 Read the company's explanation and any quantified liquidation effect; do not
  864. 1:05:51 label the entire reserve change a liquidation gain.
  865. 1:05:55 Check your understanding.
  866. 1:05:58 Does every last in, first out liquidation increase profit?
  867. 1:06:03 Pause to answer.
  868. 1:06:05 No.
  869. 1:06:07 Compare the older costs released with the current-cost benchmark.
  870. 1:06:13 Lower older costs raise profit relative to that benchmark.
  871. 1:06:18 Higher older costs reduce it.
  872. 1:06:22 Dollar-value last in, first out:
  873. 1:06:26 compare inventory at the same prices.
  874. 1:06:29 A company may end the year with fewer units of one product and more of
  875. 1:06:34 another.
  876. 1:06:36 Counting the units alone does not tell us whether inventory increased, because
  877. 1:06:40 the products can have different costs.
  878. 1:06:44 Price beginning and ending inventory at the same prices to compare the changed
  879. 1:06:49 mix without price increases interfering.
  880. 1:06:52 Dollar-value last in, first out uses that comparison for a pool, a group of
  881. 1:07:00 goods whose combined inventory cost the company measures together.
  882. 1:07:05 An increase in the pool's inventory at those common prices creates a new cost
  883. 1:07:10 layer.
  884. 1:07:13 Put beginning and ending inventory on the same price basis.
  885. 1:07:18 On January 1, 2027, a company begins using dollar-value last in, first out
  886. 1:07:25 with one inventory pool costing 100,000 dollars.
  887. 1:07:30 The base year is the year the company begins using the method.
  888. 1:07:35 Its base-year prices are the prices at the start of that year, January 1, 2027
  889. 1:07:42 in this example.
  890. 1:07:43 By December 31, the quantities and mix of products in the pool have changed.
  891. 1:07:49 The ending inventory costs 132,000 dollars at year-end prices.
  892. 1:07:55 We need to find what that ending inventory would cost at January 1 prices
  893. 1:08:00 before comparing it with the beginning inventory.
  894. 1:08:04 A price index compares the cost of the same ending mix at year-end prices and
  895. 1:08:10 at base-year prices.
  896. 1:08:12 For this course, the pool's index is supplied.
  897. 1:08:15 You use it to calculate the inventory layers; you do not need to construct it.
  898. 1:08:21 Information supplied,
  899. 1:08:23 January 1 inventory at base-year prices;
  900. 1:08:27 Amount, 100,000 dollars.
  901. 1:08:31 Information supplied,
  902. 1:08:33 December 31 inventory at year-end prices;
  903. 1:08:38 Amount, 132,000 dollars.
  904. 1:08:43 Information supplied,
  905. 1:08:45 Price index for the ending inventory pool;
  906. 1:08:49 Amount, 1.10.
  907. 1:08:52 The index of 1.10 means the ending inventory costs 10 percent more at year-end
  908. 1:09:00 prices than the same goods would cost at base-year prices.
  909. 1:09:05 Divide by that index to find the base-year amount:
  910. 1:09:09 Inventory at base-year prices equals inventory at year-end prices divided by
  911. 1:09:16 the supplied price index.
  912. 1:09:19 Divide 132,000 dollars by the 1.10 price index.
  913. 1:09:27 Ending inventory at base-year prices is 120,000 dollars.
  914. 1:09:34 Identify the increase in the pool.
  915. 1:09:38 We can now compare both inventories at January 1 prices.
  916. 1:09:44 Beginning inventory costs 100,000 dollars at those prices;
  917. 1:09:49 ending inventory costs 120,000 dollars.
  918. 1:09:54 The difference is the new layer:
  919. 1:09:57 Subtract the original 100,000-dollar layer from 120,000 dollars at base-year
  920. 1:10:05 prices.
  921. 1:10:06 The increase is a 20,000-dollar new layer.
  922. 1:10:11 Both columns in the diagram use starting-year prices.
  923. 1:10:16 The original layer is 100,000 dollars.
  924. 1:10:19 The ending pool contains that original layer plus a new 20,000-dollar layer.
  925. 1:10:26 The price increase has been removed before comparing their quantities in
  926. 1:10:30 dollars.
  927. 1:10:33 Assign a cost to the new layer.
  928. 1:10:36 The original layer keeps its 100,000 dollars cost.
  929. 1:10:41 The new layer was added when prices were higher, so multiply its base-year
  930. 1:10:46 amount by the index for 2027:
  931. 1:10:50 Layer, Original inventory;
  932. 1:10:54 Calculation,
  933. 1:10:55 Retain its starting cost; Dollar-value last in, first out cost, 100,000
  934. 1:11:02 dollars.
  935. 1:11:04 Layer, New 2027 layer;
  936. 1:11:08 Calculation, 20,000 dollars times 1.10; Dollar-value last in, first out cost,
  937. 1:11:16 22,000 dollars.
  938. 1:11:20 Layer, Ending inventory;
  939. 1:11:23 Calculation, 100,000 dollars + 22,000 dollars; Dollar-value last in, first out
  940. 1:11:31 cost, 122,000 dollars.
  941. 1:11:36 Dividing by the index lets us identify the new layer without counting price
  942. 1:11:42 increases as additional inventory.
  943. 1:11:45 Multiplying only that new layer by its index assigns its acquisition-year
  944. 1:11:50 cost.
  945. 1:11:51 The original layer is not repriced.
  946. 1:11:55 Each layer keeps the price index from the year it was added.
  947. 1:11:59 If the pool later shrinks at base-year prices, the company removes costs from
  948. 1:12:04 its newest layers first.
  949. 1:12:08 Treasury Regulation section 1.472-8(a)) describes the base-year approach.
  950. 1:12:15 Check your understanding.
  951. 1:12:18 Why is the new layer not the full 32,000-dollar increase at current prices?
  952. 1:12:25 Pause to answer.
  953. 1:12:27 That increase includes higher prices.
  954. 1:12:30 First compare both amounts at base-year prices: 120,000 minus 100,000 gives
  955. 1:12:39 20,000 dollars.
  956. 1:12:40 Apply the new layer's 1.10 index to obtain its 22,000-dollar recorded cost.
  957. 1:12:50 Practice.
  958. 1:12:52 Open the Chapter 16 practice.
  959. 1:12:55 The questions progress from cost methods and sale timing to reserve
  960. 1:13:00 adjustments and inventory measures.
  961. 1:13:03 Each question supplies its own facts and answer feedback.
  962. 1:13:08 Accounting sources.
  963. 1:13:09 A S C Topic 330, Subtopic 10, Section 30, paragraphs 9 through 11 addresses
  964. 1:13:19 cost-flow assumptions and identified costs.
  965. 1:13:22 A S C Topic 330, Subtopic 10, Section 50, paragraph 1 addresses consistent
  966. 1:13:31 application and disclosure.
  967. 1:13:34 Open Inventory, Topic 330 in the Financial Accounting Standards Board's
  968. 1:13:39 Accounting Standards Codification.
  969. 1:13:42 If prompted, sign in or register for the available access option, then locate
  970. 1:13:47 the named paragraphs.
  971. 1:13:49 The international financial reporting standards Foundation's IAS 2
  972. 1:13:55 page identifies the permitted cost formulas.
  973. 1:13:59 Paragraphs 23 through 27 contain the related requirements;
  974. 1:14:05 access to the full standard may require registration or a subscription.
  975. 1:14:10 Regulation S X, Rule 5-02, paragraph 6 addresses inventory presentation and
  976. 1:14:19 the stated last in, first out disclosure requirement.
  977. 1:14:24 The Internal Revenue Service's last in, first out conformity guidance
  978. 1:14:28 discusses Internal Revenue Code section 472 and Treasury Regulation section
  979. 1:14:34 1.472-2, paragraph E.
  980. 1:14:40 Complete the separate Chapter 16 practice.
  981. 1:14:44 Calculate inventory and expense before comparing gross profit, turnover, and
  982. 1:14:50 days.
  983. 1:14:51 Use a consistent cost basis in each comparison.

Course objectives

  • 5.2a Calculate and evaluate how a cost-flow assumption affects reported results and comparability.
  • 5.2b Restate LIFO inventory information to a comparable basis.
  • 5.4b Calculate and interpret inventory turnover and days in inventory using comparable costs and periods.
In this chapter
  1. Assign the cost of an identified item
  2. Assign costs to interchangeable goods
  3. Purchases before the only sale
  4. First-in, first-out
  5. Last-in, first-out
  6. Average cost
  7. Selling before the next purchase
  8. Periodic: assign costs at month-end
  9. Perpetual: assign costs at each sale
  10. Compare periodic and perpetual costs for the November 6 sale
  11. Perpetual: record the November 10 purchase
  12. Perpetual moving average: calculate the next sale cost
  13. Compare periodic weighted average with perpetual moving average
  14. Perpetual LIFO: assign costs at each sale
  15. Periodic LIFO: assign costs at month-end
  16. FIFO: compare perpetual and periodic costs
  17. Compare all methods and systems for November
  18. Interpret the reported profit
  19. Read the cost policy before comparing companies
  20. Calculate inventory turnover and days
  21. Compare annual amounts under periodic methods
  22. Use total inventory for a manufacturer-wide comparison
  23. Distinguish reported profit from taxable income
  24. Qualifying to use LIFO for taxes
  25. Use a LIFO reserve for a comparable basis
  26. See the reserve in the remaining cost layers
  27. Use the disclosed annual reserve
  28. Adjust the measures to compare with companies using FIFO
  29. Identify a LIFO liquidation effect
  30. Dollar-value LIFO: compare inventory at the same prices
  31. Put beginning and ending inventory on the same price basis
  32. Identify the increase in the pool
  33. Assign a cost to the new layer
Review and resources
  1. Practice
  2. Accounting sources
  3. Key concepts
  4. Common mistakes
  5. Optional lessons

A retailer can buy the same product at different prices during a month. When it sells part of that inventory, it must assign some of the available cost to the sale. The rest remains in inventory. The quantity sold does not, by itself, establish which costs become expense.

In Chapter 15, Second Helping's inventory examples used a uniform unit cost. We could multiply the quantity by that cost. Here, we keep the distinction between goods sold and goods remaining, but introduce different acquisition costs. You will calculate how the company assigns those costs and interpret the resulting profit and inventory measures.

Amounts are in US dollars. Each new case states its period and assumptions; no balance carries forward from Chapter 15 unless expressly identified.

Refresher

Review periodic and perpetual entries in Chapter 15 for how each system records inventory transactions.

Assign the cost of an identified item

Specific identification assigns the actual recorded cost of a particular item to its sale. The company retains records connecting that item to its acquisition cost. The method is useful when the items are individually distinct, such as diamonds with different characteristics and grading reports.

Consider a separate company, Facet Jewelers. Its December 2026 inventory contains these individually documented stones. Each letter identifies a particular stone and its attached grading report, not a category of diamonds.

Stone Identifying description Acquisition cost
A Round diamond with its own grading report $2,400
B Emerald-cut diamond with its own grading report $3,700
C Pear-shaped diamond with its own grading report $5,100

Facet sells stones A and C. Their costs become cost of goods sold:

$2,400 + $5,100 = $7,500.

Facet started with diamonds costing $11,200. It sold stones A and C, so their $7,500 cost became cost of goods sold. Unsold stone B remains an inventory asset at its $3,700 cost.

Facet uses the costs of the stones actually sold. It cannot choose different stones' costs merely to report a preferred profit.

Quick check

Facet sells stone B instead. Which cost becomes expense?

Compare your answer.

The cost of stone B, $3,700, becomes expense. The company does not average the stones' costs or select the oldest invoice. It identifies the stone sold and follows its recorded acquisition cost.

Assign costs to interchangeable goods

Second Helping sells interchangeable casserole dishes. A customer buying the same model receives the same product regardless of the retailer's purchase date. The company nevertheless may have paid different prices for those dishes.

A cost-flow assumption specifies which acquisition costs become expense and which remain in inventory. It does not prescribe which physical dish a warehouse employee selects. Under Accounting Standards Codification (ASC) 330-10-30-9 through 30-11, accepted assumptions include first-in, first-out (FIFO), average cost, and last-in, first-out (LIFO).

The company uses FIFO, LIFO, or average cost to assign costs to goods sold and goods remaining. Under perpetual records, it assigns costs at each sale. Under periodic records, it assigns costs through a period-end calculation. Under both systems, the company recognizes sales revenue when control of the goods transfers to the customer.

These methods also apply to a manufacturer's finished goods. A retailer's inventory cost comes from purchasing merchandise; a manufacturer's finished-goods cost comes from materials, labor, and manufacturing overhead. Once production is complete, the manufacturer uses FIFO, LIFO, or average cost to assign those costs between goods sold and goods remaining.

Common mistake
  • Mistaken idea: A label or FIFO result proves which unit moved

    Mistaken reasoning: This mistake treats a product label as a supported specific unit cost trace or treats FIFO cost assignment as evidence of physical movement.

    Read the full explanation

Purchases before the only sale

Use a separate November 2026 product example with no beginning inventory. The stated unit costs include all acquisition costs. There are no returns, shortages, freight adjustments, or write-downs.

Date Transaction Acquisition cost
November 2 Buy 12 dishes at $20 per dish. $240
November 10 Buy 8 dishes at $30 per dish. $240
November 15 Sell 6 dishes. Assigned below.

Available inventory is 20 dishes costing $480. After the sale, 14 dishes remain. We must assign the available cost between the sold and remaining dishes.

Second Helping makes both purchases before selling any dishes. Periodic and perpetual calculations therefore produce the same result for each method. That agreement depends on these transaction dates. We will change the sale date after comparing the cost methods.

First-in, first-out

First-in, first-out (FIFO) assigns the earliest available costs to goods sold. A cost layer is a quantity of units carried at a particular unit cost. Here, the earliest layer contains 12 dishes at $20 per dish.

The sale uses only part of that layer:

6 dishes × $20 per dish = $120 cost of goods sold.

The remaining inventory contains 6 dishes at $20 per dish and 8 dishes at $30 per dish. Its cost is $360. The oldest costs entered expense, so the more recent costs remain in inventory.

FIFO: November 15 sale
Dishes
20151050
November 10
8 dishes × $30 = $240
November 2
6 dishes × $20 = $120
November 2
6 dishes × $20 = $120
Cost of goods sold
6 dishes × $20 per dish
= $120.
Ending inventory = $360.
The shaded portion becomes cost of goods sold; the unshaded portion remains in inventory.
Quick check

If Second Helping sells another dish before buying more, what cost does FIFO assign to that sale?

Compare your answer.

FIFO assigns $20 to the next dish sold. After the first sale, 6 dishes remain in the November 2 cost layer. The company uses those costs before assigning any November 10 costs to a sale.

Last-in, first-out

Last-in, first-out (LIFO) assigns the latest available costs to goods sold. For this sale, the latest layer contains 8 dishes at $30 per dish. Both purchases have already occurred.

6 dishes × $30 per dish = $180 cost of goods sold.

Ending inventory costs $300. Second Helping sold the same quantity as under FIFO. It reports a different expense because it assigns the later, higher acquisition costs to the sale.

LIFO: November 15 sale
Dishes
20151050
November 10
6 dishes × $30 = $180
Nov. 10: 2 × $30 = $60
November 2
12 dishes × $20 = $240
Cost of goods sold
6 dishes × $30 per dish
= $180.
Ending inventory = $300.
The shaded portion becomes cost of goods sold; the unshaded portion remains in inventory.
Quick check

Would selecting the oldest physical dishes prevent the company from using LIFO?

Compare your answer.

No. LIFO is a cost assignment. A company can physically sell older goods while assigning more recent acquisition costs to expense. Inventory records must still account for the actual quantities sold and remaining.

Average cost

Weighted-average cost divides available cost by available units. Each unit contributes to the calculation, so a larger purchase receives more weight than a smaller purchase.

$48020 dishes = $24 per dish.

6 dishes × $24 per dish = $144 cost of goods sold.

Ending inventory costs $336.

Weighted average: November 15 sale
Dishes
20151050
14 dishes × $24 = $336
6 dishes × $24 = $144
Cost of goods sold
6 dishes × $24 per dish
= $144.
Ending inventory = $336.
The shaded portion becomes cost of goods sold; the unshaded portion remains in inventory.

Under every method, cost of goods sold plus ending inventory equals the original $480 cost:

Method Cost of goods sold Ending inventory
FIFO $120 $360
LIFO $180 $300
Average cost $144 $336

For unchanged sales revenue, the higher expense under LIFO means lower gross profit. No method changed the quantity purchased, the quantity sold, or the amount paid to suppliers in this example.

Quick check

Why is the weighted average below the simple midpoint of the purchase prices?

Compare your answer.

Second Helping purchased more dishes at the lower price. Dividing total cost by total units gives that larger purchase more weight. Averaging the invoice prices alone would treat the purchase quantities as equal.

Selling before the next purchase

Now change only the first sale date, from November 15 to November 6. The purchases, unit costs, and quantity sold remain unchanged. The retailer now sells the dishes before making its second purchase.

November 2
Buy 12 dishes
at $20 per dish
Dishes
20151050
12 dishes on hand
November 6
Sell 6 dishes
Dishes
20151050
6 dishes on hand
November 10
Buy 8 dishes
at $30 per dish
Dishes
20151050
14 dishes on hand
The quantity on hand is the same under every cost method and inventory system.
Common mistake
  • Mistaken idea: The recordkeeping system selects cost flow or proves the count

    Mistaken reasoning: This mistake treats periodic or perpetual record timing as a FIFO, average, or LIFO choice, or treats a running record as proof of physical quantity and ownership.

    Read the full explanation

Periodic: assign costs at month-end

Under periodic accounting, Second Helping calculates cost of goods sold at the November close. It purchased 20 dishes costing $480, sold 6, and has 14 remaining. Those quantities and costs are unchanged even though the sale now occurs on November 6.

Periodic method Cost of goods sold Ending inventory
FIFO 6 dishes × $20 = $120 $480 − $120 = $360
LIFO 6 dishes × $30 = $180 $480 − $180 = $300
Weighted average 6 dishes × $24 = $144 $480 − $144 = $336

The periodic weighted average remains:

$48020 dishes = $24 per dish.

Periodic LIFO uses the November 10 purchase costs because the company assigns costs at month-end using all purchases made during November.

Periodic FIFO
At November close
Dishes
20151050
November 10
8 dishes × $30 = $240
November 2
6 dishes × $20 = $120
November 2
6 dishes × $20 = $120
Cost of goods sold
6 dishes × $20 per dish
= $120.
Ending inventory = $360.
Periodic FIFO assigns the November 2 costs to the dishes sold on November 6.
Periodic LIFO
At November close
Dishes
20151050
November 10
6 dishes × $30 = $180
Nov. 10: 2 × $30 = $60
November 2
12 dishes × $20 = $240
Cost of goods sold
6 dishes × $30 per dish
= $180.
Ending inventory = $300.
At the November close, both purchases are included. Periodic LIFO assigns the November 10 costs to the dishes sold on November 6.

Perpetual: assign costs at each sale

Under perpetual accounting, the company assigns costs when it records the November 6 sale. At that date, only the first purchase is available. Each method assigns $20 per dish, making the sale's cost $120. On November 6, Second Helping has purchased only the $20 dishes, so each dish sold adds $20 to cost of goods sold.

Perpetual: November 6 sale
Dishes
20151050
November 2
6 dishes sold
November 2
6 dishes × $20 = $120
Cost of goods sold
6 dishes × $20 per dish
= $120.
Remaining inventory cost = $120.
Only the November 2 purchase is available at this sale. Under perpetual accounting, FIFO, LIFO, and moving average each assign $20 per dish.

Compare periodic and perpetual costs for the November 6 sale

Method Periodic cost of goods sold Perpetual cost of goods sold
FIFO $120 $120
LIFO $180 $120
Average cost $144 $120

Under perpetual LIFO, latest means the latest available costs at the time of that sale. Under periodic LIFO, the assignment uses the period's available costs. That difference explains the LIFO results above without changing the meaning of the cost method.

Quick check

Can perpetual LIFO use the November 10 purchase cost for the November 6 sale?

Compare your answer.

No. The purchase had not occurred when the company recorded the sale. The periodic calculation can assign those later costs at the November close, but the perpetual calculation uses costs available at each sale.

Perpetual: record the November 10 purchase

November 10 purchase
Dishes
20151050
November 10
8 dishes × $30 = $240
November 2
6 dishes × $20 = $120
Total inventory cost = $360.
The November 10 purchase adds $240 to inventory. The cost already recorded for the November 6 sale remains $120.

After the November 10 purchase, inventory contains two purchase costs. At the next sale, FIFO, LIFO, and moving average can assign different costs.

Perpetual moving average: calculate the next sale cost

Continue the revised timeline. On November 18, Second Helping sells another 5 dishes. No further transactions occur during November. This adds a transaction to the revised case; it does not replace the first sale.

Under perpetual average cost, called moving average, the company recalculates the average after each purchase. A sale removes units and cost at the average then in effect. The sale itself does not change that unit average.

After each purchase, calculate the new average using the inventory still on hand and the goods just purchased:

New average cost per unit = Remaining inventory cost + New purchase costRemaining units + Units purchased

Use the remaining inventory cost, after subtracting the costs of earlier sales. Then multiply the units in the next sale by this new average to calculate cost of goods sold.

The November 2 purchase cost $240. The November 6 sale removed $120 of that cost:

$240 − $120 = $120 remaining inventory cost.

The sale also reduced the quantity from 12 dishes to 6.

November 6 sale
Dishes
20151050
November 2
6 dishes sold
November 2
6 dishes × $20 = $120
Cost of goods sold
6 dishes × $20 per dish
= $120.
Remaining inventory cost = $120.

On November 10, Second Helping buys 8 more dishes for $240. Calculate the new average from the remaining inventory and this purchase:

$120 + $2406 dishes + 8 dishes = about $25.714286 per dish.
Perpetual moving average
November 10 purchase
Dishes
20151050
November 10
8 dishes × $30 = $240
November 2
6 dishes × $20 = $120
Total inventory cost = $360.
New moving average
Dishes
20151050
Combined cost
$36014 dishes
= about $25.714286 per dish.

On November 18, Second Helping sells 5 dishes. Multiply that quantity by the new average to calculate cost of goods sold:

5 dishes × $25.714286 per dish = $128.57, rounded to cents.

Subtract the sale's cost from the $360 available after the November 10 purchase:

$360 − $128.57 = $231.43 ending inventory.
Perpetual moving average
November 18 sale
Dishes
20151050
Average cost
5 dishes sold
9 dishes × $25.714286
≈ $231.43
Cost of goods sold
5 dishes × $25.714286 per dish
= $128.57, rounded to cents.
Ending inventory = $231.43.
Transaction Cost assigned to the sale Inventory cost after transaction
November 6 sale $120 $120
November 10 purchase No sale occurs. $360
November 18 sale $128.57 $231.43
Quick check

Does the November 18 sale require another moving-average calculation?

Compare your answer.

No. Apply the average established after the November 10 purchase. Both quantity and cost leave inventory at that average. Recalculate when another purchase changes the available quantity and cost.

Compare periodic weighted average with perpetual moving average

Calculate the periodic weighted-average cost per unit using beginning inventory and all purchases during the period:

Periodic weighted-average cost per unit = Beginning inventory cost + Purchase costBeginning inventory units + Units purchased

Second Helping has no beginning inventory. At the November close, its goods available for sale consist of the two purchases:

$48020 dishes = $24 per dish.

Apply that average to all 11 dishes sold during November:

Inventory system and method November cost of goods sold
Periodic weighted average 11 dishes × $24 = $264

The November 10 purchase raises the periodic average applied to all November sales.

Under perpetual moving average, Second Helping uses the average available at each sale. The November 6 sale occurs before the higher-cost purchase, so its cost remains $120. Add the costs recorded for the two sales:

Inventory system and method November cost of goods sold
Perpetual moving average $120 + $128.57 = $248.57

Perpetual LIFO: assign costs at each sale

Use the same revised timeline, including the November 18 sale. Under perpetual LIFO, the November 6 sale already cost $120.

November 6 sale
Dishes
20151050
November 2
6 dishes sold
November 2
6 dishes × $20 = $120
Cost of goods sold
6 dishes × $20 per dish
= $120.
Remaining inventory cost = $120.

After the November 10 purchase, inventory contains 6 dishes at $20 and 8 dishes at $30 per dish.

Perpetual LIFO
November 10 purchase
Dishes
20151050
November 10
8 dishes × $30 = $240
November 2
6 dishes × $20 = $120
Total inventory cost = $360.

The November 18 sale uses 5 dishes from the latest available layer:

5 dishes × $30 per dish = $150.

Total perpetual LIFO cost of goods sold is $270. The remaining layers contain 6 dishes at $20 and 3 dishes at $30 per dish, totaling $210.

Perpetual LIFO
November 18 sale
Dishes
20151050
November 10
5 dishes sold
November 10
3 × $30 = $90
November 2
6 × $20 = $120
Cost of goods sold
5 dishes × $30 per dish
= $150.
Ending inventory = $210.

Periodic LIFO: assign costs at month-end

Under periodic LIFO, assign costs to all 11 dishes sold at month-end. Use the entire latest purchase first, then enough of the earlier purchase to complete the sold quantity. This produces cost of goods sold of $300 and ending inventory of $180.

FIFO: compare perpetual and periodic costs

Perpetual FIFO

Under perpetual FIFO, both sales use the earliest remaining costs. The second sale still fits within the first purchase layer, so it costs $100. Total expense is $220. The remaining inventory costs $260.

Periodic FIFO

Periodic FIFO assigns the same earliest costs to the period's sold quantity. For these ordinary purchases and sales, FIFO produces the same ending amounts under either system. Average cost and LIFO can differ when purchases and sales are interspersed.

Compare all methods and systems for November

The completed November case has 11 dishes sold and 9 remaining. Every row below reconciles to the same $480 available cost.

Method and system Cost of goods sold Ending inventory
FIFO, either system $220 $260
Periodic weighted average $264 $216
Perpetual moving average $248.57 $231.43
Periodic LIFO $300 $180
Perpetual LIFO $270 $210
Quick check

The physical count is identical under every method. Why do the reported inventory amounts differ?

Compare your answer.

The company assigns different costs to the same remaining quantity. A count establishes units, subject to the ownership checks from Chapter 15. The cost method and system establish which costs remain assigned to those units.

Interpret the reported profit

Gross profit equals sales revenue less cost of goods sold. Suppose Second Helping sells every dish in the completed November case for $48. Revenue is $528 under every method.

Method and system Sales revenue Less: cost of goods sold Gross profit
FIFO, either system $528 $220 $308
Periodic weighted average $528 $264 $264
Perpetual moving average $528 $248.57 $279.43
Periodic LIFO $528 $300 $228
Perpetual LIFO $528 $270 $258

FIFO produces higher profit here because purchase prices rose and FIFO assigned the earlier, lower costs to expense. The company did not sell more dishes or charge more under FIFO. A comparison of profit must distinguish a change in cost assignment from a change in selling prices, sales volume, or purchase costs.

What if purchase prices fell instead? Imagine Second Helping buys 12 dishes at $30 each, then 8 dishes at $20 each. It sells 6 dishes after both purchases, at the same selling price under either method. Which method would now produce the higher gross profit?

FIFO assigns the earlier $30 cost to each dish sold, making cost of goods sold $180. LIFO assigns the later $20 cost, making cost of goods sold $120. LIFO assigns the most recent purchase costs to the sale. Because those costs are lower here, cost of goods sold is lower and gross profit is higher.

Under FIFO, ending inventory retains the most recent purchase costs. LIFO can retain much older costs, although perpetual LIFO may also leave newer costs from later purchases. Both methods use acquisition costs, which may differ from what the company would pay to replace the inventory today.

Read the cost policy before comparing companies

Under US generally accepted accounting principles (GAAP), ASC 330-10-30-9 permits FIFO, average cost, and LIFO. ASC 330-10-50-1 requires consistent application and disclosure of the inventory basis. A company does not freely switch methods each year to obtain a preferred profit.

Read the inventory composition as well as the method. A retailer's merchandise and a manufacturer's total inventory contain different stages of goods.

IFRS comparison

International Financial Reporting Standards (IFRS) differ. International Accounting Standard (IAS) 2, paragraphs 23 and 25, uses specific identification for specified noninterchangeable items and FIFO or weighted average for other inventory. LIFO is not permitted. An IFRS company's inventory therefore cannot be assumed comparable to a US company's LIFO inventory without adjustment. See the IFRS Foundation's IAS 2 page.

Refresher

Review inventory and cost of goods sold in Chapter 15 for how inventory costs move through the operating cycle.

Calculate inventory turnover and days

A company commits money to inventory before it sells the goods. Managers need enough inventory to fill orders, but holding goods adds storage costs and the risk of damage or obsolescence. Inventory turnover and days in inventory help managers assess how quickly goods sell relative to the inventory the company holds.

Inventory turnover estimates how many times a company sells an amount of inventory equal to its average stock during a period. Higher turnover can reflect faster sales relative to stock held; lower turnover can indicate slower sales or a buildup of stock. Accounting adjustments can also change the ratio without changing the movement of goods.

In some business contexts, turnover means sales revenue. Inventory turnover measures something different: how many times the company sold an amount equal to its average inventory. Because inventory is recorded at cost, we also measure the goods sold at cost. Using sales revenue would count the selling markup as though it were additional inventory sold.

Inventory turnover (times) = Cost of goods sold ($)Average inventory cost ($)

Here, we estimate average inventory using the beginning and ending balances. We add those 2 balances and divide by 2:

Average inventory cost ($) = Beginning inventory cost ($) + Ending inventory cost ($)2

A company may build inventory before a busy season and sell most of it before year-end. Beginning and ending balances can miss the higher inventory held during that season. More frequent observations, such as monthly balances, can better reflect inventory held throughout the period. For balances taken at regular intervals, add the balances and divide by the number of inventory balances included in the calculation:

Average inventory cost ($) = Sum of observed inventory cost balances ($)Number of balances observed

The denominator counts balances, not periods. For example, averaging 12 month-end balances means dividing by 12. State which balances you use.

Days in inventory estimates how long the company holds goods before selling them, on average. The calculated days depend on the recorded costs used in turnover, rather than the actual purchase and sale dates of each item. Use the number of days in the reporting period and the unrounded turnover result:

Days in inventory = Days in the periodInventory turnover (times)

Compare annual amounts under periodic methods

On January 1, 2027, Second Helping has inventory costing $20,000. All beginning inventory units have the same unit cost, so the beginning balance is the same under every method. During 2027, Second Helping purchases $70,000 of merchandise and earns $120,000 in sales revenue.

The supplied year-end cost assignments below describe the same physical goods and sales under alternative periodic methods. There are no shortages or write-downs. Use beginning and ending inventory to calculate the average, and use 365 days for the year.

Amount FIFO Weighted average LIFO
Beginning inventory $20,000 $20,000 $20,000
Ending inventory $22,000 $19,000 $16,000
MeasureFIFOWeighted averageLIFO
Cost of goods sold = Beginning inventory cost ($) + Purchases ($) − Ending inventory cost ($)
Calculation$20,000 + $70,000 − $22,000$20,000 + $70,000 − $19,000$20,000 + $70,000 − $16,000
Result$68,000$71,000$74,000
Average inventory cost = Beginning inventory cost ($) + Ending inventory cost ($)2
Calculation$20,000 + $22,0002$20,000 + $19,0002$20,000 + $16,0002
Result$21,000$19,500$18,000
Inventory turnover = Cost of goods sold ($)Average inventory cost ($)
Calculation$68,000$21,000$71,000$19,500$74,000$18,000
Result≈ 3.24 times≈ 3.64 times≈ 4.11 times
Days in inventory = Days in the period × Average inventory cost ($)Cost of goods sold ($)
Calculation365 × $21,000$68,000365 × $19,500$71,000365 × $18,000$74,000
Result≈ 112.7 days≈ 100.2 days≈ 88.8 days

The days calculation uses inventory cost and cost of goods sold directly to avoid rounding turnover first. It is equivalent to dividing days in the period by inventory turnover.

Under FIFO, Second Helping's turnover of 3.24 means it sold about 3.24 times the amount it typically held in inventory, measured at cost. The 112.7-day estimate suggests that goods remain in inventory for roughly that long before sale. Managers can compare these measures with prior years and similar retailers to investigate changes in purchasing or sales.

LIFO produces higher turnover and fewer days in inventory than FIFO or weighted average in this example. Its cost of goods sold is higher, while its average inventory cost is lower. Physical sales and inventory quantities are unchanged, so these differences do not establish faster selling or better inventory management.

Higher turnover and fewer days in inventory can indicate that a company is selling goods faster while holding less inventory. But holding less inventory helps only if the company can still fill customer orders. If inventory falls because the company cannot obtain enough goods, turnover may rise even as it loses sales. To judge whether the increase is an improvement, consider why inventory fell and whether the company can meet customer demand.

Quick check

Can you combine LIFO cost of goods sold with FIFO average inventory to improve comparability?

Compare your answer.

No. The numerator and denominator would use different cost bases. Adjust cost of goods sold and both inventory balances to the same basis before calculating the comparison. Adjusting only ending inventory also leaves an inconsistent average.

Use total inventory for a manufacturer-wide comparison

You can calculate inventory turnover for any span of time, such as a week, 6 weeks, a month, or a year. Use cost of goods sold and average inventory for that same span. Compare turnover over periods of equal length, while considering seasonal differences. To calculate days in inventory, use the actual number of days in the chosen period.

Homefield Advantage Athletics manufactures baseball gloves and uses FIFO. Its December 2027 cost of goods sold is $1,960. For its inventory turnover, include raw materials, work in process, and finished goods:

Inventory December 1 December 31
Raw materials $410 $530
Work in process $620 $740
Finished goods $770 $630
Total inventory $1,800 $1,900

Average total inventory is $1,850. Dividing December cost of goods sold of $1,960 by that average gives 1.06 times during December. This is a monthly measure, not annual turnover.

Using only finished goods gives an average of $700 and turnover of 2.80 for the same month. Finished-goods turnover excludes raw materials and work in process from average inventory. Its smaller denominator produces a higher turnover ratio than total-inventory turnover for the same company. Comparing one manufacturer's finished-goods turnover with another's total-inventory turnover could therefore suggest a difference in selling speed that comes from which inventory accounts were included.

Quick check

Why would using only Homefield's finished goods produce a higher turnover ratio?

Compare your answer.

The cost of goods sold stays the same, but average inventory is smaller when raw materials and work in process are excluded. The higher ratio does not mean Homefield sold more gloves.

Distinguish reported profit from taxable income

The annual comparison uses financial-reporting amounts. A difference in reported cost of goods sold does not, by itself, establish a difference in taxable income. The company must calculate taxable income under tax rules before estimating a tax effect.

Suppose a separate tax calculation establishes that Second Helping's taxable income would be $6,000 lower under LIFO than under FIFO. If that income would otherwise be taxed at 25%, with no other tax effects, the reduction in current income tax owed would be:

$6,000 reduction in taxable income × 25% = $1,500 reduction in current tax owed.

This calculation uses an assumed difference in taxable income, not the difference in financial-statement expense alone. It does not calculate total income tax expense for the financial statements, which can also include deferred taxes.

Qualifying to use LIFO for taxes

To use LIFO for US federal income taxes, a company generally must also use LIFO when reporting annual income to owners and lenders. This is the LIFO conformity requirement under Internal Revenue Code section 472(c) and Treasury Regulation section 1.472-2(e).

When rising costs make LIFO income lower than FIFO income, the company cannot use LIFO for taxes while presenting FIFO income as its primary annual income figure to owners or lenders. It can provide a FIFO comparison as supplemental information if it follows the regulation's disclosure requirements. The Internal Revenue Service's LIFO conformity guidance describes the permitted supplemental reporting.

Use a LIFO reserve for a comparable basis

A LIFO reserve is a disclosed difference between the LIFO carrying amount and another stated inventory basis. Read the company's definition before assuming the comparison basis is FIFO. For companies subject to Regulation S-X (including publicly traded companies and companies registering a public securities offering), Rule 5-02(6)(c) addresses disclosure of material replacement or current cost in excess of stated LIFO value.

See the reserve in the remaining cost layers

In Second Helping's first example, both purchases occur before the November 15 sale. After that sale, 14 dishes remain under either method. FIFO assigns those dishes $360 of cost; LIFO assigns them $300.

FIFO ending inventory
Dishes
20151050
Nov. 10: 2 × $30 = $60
November 10
6 dishes × $30 = $180
November 2
6 dishes × $20 = $120
14 dishes; total cost = $360.
LIFO ending inventory
Dishes
20151050
Nov. 10: 2 × $30 = $60
November 2
6 dishes × $20 = $120
November 2
6 dishes × $20 = $120
14 dishes; total cost = $300.
The outlined portions compare costs assigned to the same quantity. They are parts of the dated purchase layers, not additional purchases.
FIFO-minus-LIFO reserve
6 dishes × ($30 − $20) = $60

The other portions have the same assigned costs under both methods. The $60 reserve is the cost difference for the outlined 6 dishes. It does not represent additional goods.

Use the disclosed annual reserve

A company reports the following inventory amounts in its 2027 financial statements. Its inventory note defines the reserve as FIFO inventory minus LIFO inventory. All inventory is included in that comparison, and there are no other reconciling items.

Amount January 1, 2027 December 31, 2027
Reported LIFO inventory $40,000 $48,000
FIFO-minus-LIFO reserve $6,000 $9,000
Inventory on a FIFO basis $46,000 $57,000

Add each reserve to the LIFO inventory balance at the same date. To see how these balances affect cost of goods sold, compare the inventory accounts. The company reports LIFO cost of goods sold of $156,000. We can calculate purchases from its reported LIFO balances:

Purchases = $156,000 + $48,000 − $40,000 = $164,000.

Both accounts include those same purchases. Beginning inventory and purchases are debits; the cost of goods sold leaves inventory as a credit.

To convert reported LIFO cost of goods sold to FIFO, adjust both inventory balances. The COGS calculation adds beginning inventory and subtracts ending inventory:

Adjustment from LIFO to FIFO Effect on COGS
Higher beginning inventory Add $6,000.
Higher ending inventory Subtract $9,000.

We can express the same adjustments using the change in the LIFO reserve. Adding the beginning reserve and subtracting the ending reserve is equivalent to subtracting the increase in the reserve:

FIFO COGS
= LIFO COGS − (ending reserve − beginning reserve)
= $156,000 − ($9,000 − $6,000)
= $153,000

Calculate the change as ending reserve minus beginning reserve. If the reserve decreases, subtracting the negative change adds the decrease to LIFO cost of goods sold.

Common mistake
  • Mistaken idea: The ending LIFO reserve is the period effect

    Mistaken reasoning: This mistake uses an ending reserve instead of its change or treats liquidation income as evidence of better operations.

    Read the full explanation

Adjust the measures to compare with companies using FIFO

Suppose you want to compare this company with a similar business that reports inventory under FIFO. Use the FIFO-adjusted cost of goods sold and inventory balances to calculate this company's measures on the same inventory cost basis.

The company has annual sales revenue of $260,000. Use the same beginning-and-ending average convention and 365 days.

MeasureReported LIFO basisAdjusted FIFO basis
Cost of goods sold = Beginning inventory cost ($) + Purchases ($) − Ending inventory cost ($)
Calculation$40,000 + $164,000 − $48,000$46,000 + $164,000 − $57,000
Result$156,000$153,000
Average inventory cost = Beginning inventory cost ($) + Ending inventory cost ($)2
Calculation$40,000 + $48,0002$46,000 + $57,0002
Result$44,000$51,500
Gross profit = Sales revenue ($) − COGS ($)
Calculation$260,000 − $156,000$260,000 − $153,000
Result$104,000$107,000
Gross profit rate = Gross profit ($)Sales revenue ($) × 100%
Calculation$104,000$260,000 × 100%$107,000$260,000 × 100%
Result40.00%41.15%
Inventory turnover = COGS ($)Average inventory cost ($)
Calculation$156,000$44,000$153,000$51,500
Result≈ 3.55 times≈ 2.97 times
Days in inventory = Days in the period × Average inventory cost ($)COGS ($)
Calculation365 × $44,000$156,000365 × $51,500$153,000
Result≈ 102.9 days≈ 122.9 days

You can now compare the adjusted FIFO measures with those of the business using FIFO without mixing inventory cost methods. Differences in product mix, seasonality, purchasing, and customer demand can still affect that comparison. These calculations do not change the company's accounting records; it continues to report under LIFO.

Quick check

Why not subtract the ending reserve from this year's cost of goods sold?

Compare your answer.

The ending reserve includes differences accumulated before this year. The current year's expense adjustment uses only the change between beginning and ending reserves. Both reserve balances are needed to explain that change.

Identify a LIFO liquidation effect

LIFO liquidation occurs when a reduction in inventory draws on older LIFO cost layers. The expense includes those historical costs. If they are below current costs, reported gross profit can rise even though the company has not improved its selling prices or current purchase costs.

Consider a separate Second Helping periodic LIFO case for 2028. Beginning inventory contains 40 dishes at $18 per dish. The company buys 70 dishes at $27 per dish and sells 85 dishes at $45 each. No other transactions occur.

Current purchases do not cover all units sold. The sale uses 15 units from the older layer.

Cost assigned Calculation Expense
Current purchases 70 dishes × $27 per dish $1,890
Older layer 15 dishes × $18 per dish $270
Total cost of goods sold Current costs plus older costs $2,160

The 25 unsold dishes make up ending inventory, with a total cost of $450.

To see how the older layer affects cost of goods sold, suppose all 85 dishes sold had cost the current purchase price of $27 each. Compare that amount with the reported LIFO cost of goods sold:

Cost of goods sold for the same 85 dishes Calculation Amount
Using the current purchase price for every dish 85 × $27 $2,295
Reported under LIFO $1,890 + $270 $2,160
Reduction from using older costs $2,295 − $2,160 $135

Sales revenue is $3,825. Reported gross profit is $1,665, compared with $1,530 using the stated current-cost benchmark. The $135 difference arises because the 15 dishes from the older layer cost $18 each, below the current purchase price of $27. Those lower costs reduce COGS and increase gross profit; sales revenue is unchanged.

The profit effect need not be favorable. If the current-cost benchmark were $14 per dish instead, the same older costs would exceed it. The released older units would reduce gross profit by $60 relative to that lower benchmark.

A decline in a disclosed reserve does not, by itself, prove liquidation. Price changes and the inventory mix can also affect the difference between cost bases. Read the company's explanation and any quantified liquidation effect; do not label the entire reserve change a liquidation gain.

Quick check

Does every LIFO liquidation increase profit?

Compare your answer.

No. Compare the released historical costs with the stated current-cost benchmark. Older costs below that benchmark raise reported profit relative to it; older costs above the benchmark reduce reported profit relative to it.

Dollar-value LIFO: compare inventory at the same prices

A company may end the year with fewer units of one product and more of another. Counting the units alone does not tell us whether inventory increased, because the products can have different costs. Price beginning and ending inventory at the same prices to compare the changed mix without price increases interfering.

Dollar-value LIFO uses that comparison for a pool, a group of goods whose combined inventory cost the company measures together. An increase in the pool's inventory at those common prices creates a new cost layer.

Put beginning and ending inventory on the same price basis

On January 1, 2027, a company begins using dollar-value LIFO with one inventory pool costing $100,000. The base year is the year the company begins using the method. Its base-year prices are the prices at the start of that year, January 1, 2027 in this example.

By December 31, the quantities and mix of products in the pool have changed. The ending inventory costs $132,000 at year-end prices. We need to find what that ending inventory would cost at January 1 prices before comparing it with the beginning inventory.

A price index compares the cost of the same ending mix at year-end prices and at base-year prices. For this course, the pool's index is supplied. You use it to calculate the inventory layers; you do not need to construct it.

Information supplied Amount
January 1 inventory at base-year prices $100,000
December 31 inventory at year-end prices $132,000
Price index for the ending inventory pool 1.10

The index of 1.10 means the ending inventory costs 10% more at year-end prices than the same goods would cost at base-year prices. Divide by that index to find the base-year amount:

Inventory at base-year prices =Inventory at year-end prices ($)Price index
$132,0001.10= $120,000 at base-year prices.
Common mistake
  • Mistaken idea: A higher inventory index proves that the pool holds more goods

    Mistaken reasoning: This mistake reads price movement as quantity movement and skips the conversion to base year cost.

    Read the full explanation

Identify the increase in the pool

We can now compare both inventories at January 1 prices. Beginning inventory costs $100,000 at those prices; ending inventory costs $120,000. The difference is the new layer:

$120,000 − $100,000 = $20,000 at base-year prices.
January 1: starting inventory
Original layer
$100,000
$100,000 at starting prices
December 31: ending inventory
New layer
$20,000
Original layer
$100,000
$120,000 at starting prices
Both columns use January 1 prices. Only the added amount forms a new layer; the original layer remains beneath it.

Assign a cost to the new layer

The original layer keeps its $100,000 cost. The new layer was added when prices were higher, so multiply its base-year amount by the index for 2027:

Layer Calculation Dollar-value LIFO cost
Original inventory Retain its starting cost. $100,000
New 2027 layer $20,000 × 1.10 $22,000
Ending inventory $100,000 + $22,000 $122,000

Dividing by the index lets us identify the new layer without counting price increases as additional inventory. Multiplying only that new layer by its index assigns its acquisition-year cost. The original layer is not repriced. Each layer keeps the price index from the year it was added. If the pool later shrinks at base-year prices, the company removes costs from its newest layers first. Treasury Regulation section 1.472-8(a) describes the base-year approach.

Quick check

Why isn't the new layer $32,000, the difference between the starting cost and the inventory at year-end prices?

Compare your answer.

That difference includes price increases. Compare inventory at the same prices first: $120,000 − $100,000 = $20,000. Then price the new layer using its 1.10 index, giving $22,000.

Practice

Open the Chapter 16 practice. The questions progress from cost methods and sale timing to reserve adjustments and inventory measures. Each question supplies its own facts and answer feedback.

Accounting sources

ASC 330-10-30-9 through 30-11 addresses cost-flow assumptions and identified costs. ASC 330-10-50-1 addresses consistent application and disclosure. Open Inventory, Topic 330 in the Financial Accounting Standards Board's Accounting Standards Codification. If prompted, sign in or register for the available access option, then locate the named paragraphs.

The IFRS Foundation's IAS 2 page identifies the permitted cost formulas. Paragraphs 23 through 27 contain the related requirements; access to the full standard may require registration or a subscription.

Regulation S-X, Rule 5-02(6) addresses inventory presentation and the stated LIFO disclosure requirement. The Internal Revenue Service's LIFO conformity guidance discusses Internal Revenue Code section 472 and Treasury Regulation section 1.472-2(e).