In this chapter
- When an inventory estimate is useful
- The gross-profit method
- A monthly inventory estimate
- Markup on cost versus gross profit margin
- Limits of the gross-profit method
- Estimating inventory losses
- The retail inventory method
- From retail value to estimated cost
- FIFO and LIFO retail estimates
- Different ratios for beginning inventory and purchases
- FIFO retail: apply the purchases ratio to remaining goods
- LIFO retail: retain the opening layer and cost the increase
- Compare the cost assignments
- Apply the inventory measurement rule after estimating cost
- Limits of the retail inventory method
- Markdowns in the retail calculation
- Missing goods and changes in product mix
- Retail methods under US GAAP and IFRS
- From the operating cycle to the cash conversion cycle
- Customer collection periods
- Inventory holding periods
- Supplier payment periods
- The cash conversion cycle
- Compare the annual cycles
- Sales growth and inventory investment
- Interpreting the cash conversion cycle
Review and resources
A company's inventory records may show what it purchased and sold without establishing exactly what remains on hand. When a physical count is unavailable, information about sales, costs, and selling prices can provide an estimate. But the result is only as reliable as the relationships used to calculate it. A change in selling prices or the mix of products sold, for example, can make a mathematically correct calculation misleading.
Inventory also affects how long a company must finance its operations. Cash may be tied up in goods awaiting sale and in receivables awaiting collection, while credit from suppliers delays the need to pay for purchases. The cash conversion cycle combines these periods to help explain how operating decisions affect the timing of cash flows.
When an inventory estimate is useful
A company may need to determine its inventory balance before it can complete a physical count. In other situations, such as a fire, some goods may no longer be available to count. Even when a physical count is possible, it establishes quantities, not necessarily ownership or cost. Inventory estimates offer another way to approximate the cost of goods on hand using available accounting information.
Two common approaches are the gross-profit method, which uses sales and an assumed gross profit margin, and the retail inventory method, which uses records maintained at both cost and retail selling prices. Neither requires the company to identify and cost every individual item remaining in inventory.
Management may use an estimate to monitor monthly operations, prepare interim financial statements, or assess inventory destroyed in a fire. The reporting rules differ between the two methods.
ASC 270-10-45-6(a) allows companies to use the gross-profit method for interim reports, such as quarterly statements, even when they use another method at year-end. Companies must disclose the interim method and any significant adjustments from reconciling the estimates with the annual physical inventory. The gross-profit method is not a regular year-end inventory valuation method.
The retail inventory method can be used for both interim and annual reports under ASC 330-10-30-13. It works best for goods with similar gross profit margins and requires reliable cost and selling-price records. The later retail-method section explains how those records support the estimate.
- Mistaken idea: An inventory estimate proves what is on hand
Correction: An inventory estimate calculates an amount from accounting records and assumptions. It does not establish which goods are physically present. A company must also determine ownership, assign costs, and evaluate inventory losses or write-downs.
Read the full explanation
Which inventory estimation method can a company use for regular annual reporting: gross-profit or retail?
Compare your answer.
The retail inventory method, when appropriate. The gross-profit method can support interim reports but is not a regular year-end inventory valuation method.
The gross-profit method
Chapter 6 introduced gross profit and the gross profit margin when comparing income statements. For a retailer, gross profit is net sales less cost of goods sold. The gross profit margin expresses that profit as a percentage of net sales.
Without a reliable ending inventory amount, the company cannot finish calculating current cost of goods sold or gross profit. It therefore estimates the gross profit margin from prior periods, comparable products, or other supporting information.
Part of each sales dollar covers the cost of the goods, and the remainder represents gross profit. An assumed profit share lets the company estimate the cost share and then the inventory remaining.
Gross profit margin = Gross profitNet sales × 100%
Suppose management estimates gross profit at 32% of sales. For each dollar of sales, 32 cents represents gross profit and 68 cents represents the cost of goods sold. If that relationship holds for the current period, the retailer can estimate cost of goods sold from its sales.
Estimated cost of goods sold = Net sales × (1 − Assumed gross profit margin)
The company can then use the inventory relationship from earlier chapters. Goods available for sale must either have been sold or remain in ending inventory, assuming no other inventory movements. Subtracting estimated cost of goods sold from goods available at cost gives estimated ending inventory.
Estimated ending inventory = Beginning inventory + Net purchases − Estimated cost of goods sold
Net sales and net purchases must reflect applicable returns, allowances, and discounts, with qualifying freight included in purchase cost. Inventory costs and transactions must also be recorded in the correct periods.
A monthly inventory estimate
Assume that Second Helping begins March 2026 with inventory of $38,600 and net purchases of $115,400. Net sales are $168,000. Based on comparable products and recent selling prices, management supports an estimated gross profit margin of 32.00% of sales. No other inventory movements apply.
| March inventory estimate | Amount |
|---|---|
| Beginning inventory at cost | $38,600 |
| Add: Net purchases at cost | $115,400 |
| Goods available for sale at cost | $154,000 |
| Net sales | $168,000 |
| Less: Estimated gross profit (32% × $168,000) | ($53,760) |
| Estimated cost of goods sold | $114,240 |
| Estimated ending inventory at cost | $39,760 |
Why would multiplying goods available for sale by the 32% gross profit margin give an incorrect estimate of ending inventory?
Compare your answer.
The 32% gross profit margin describes gross profit relative to sales, not ending inventory relative to goods available for sale. Apply the gross profit margin to sales to estimate gross profit, then determine cost of goods sold. Subtract estimated cost of goods sold from goods available for sale to estimate ending inventory.
Markup on cost versus gross profit margin
A retailer may set a selling price by adding a percentage to an item's cost. This percentage is the markup on cost. The amount added becomes gross profit when the item sells at that price.
An item costing $100 with a 25% markup sells for $125. Of that selling price, $100 covers cost and $25 is gross profit. To express gross profit as a percentage of sales, divide the $25 profit by the $125 selling price:
Gross profit margin
Gross profitSelling price × 100% = $25$125 × 100% = 20%
Markup on cost
Gross profitCost × 100% = $25$100 × 100% = 25%
Gross profit accounts for 20% of sales, leaving 80% as cost. We can use those percentages to estimate cost of goods sold from sales.
To convert a markup on cost to a gross profit margin, enter the markup as a decimal. For a 25% markup, use 0.25. The result is also a decimal; multiply it by 100 to express the gross profit margin as a percentage.
Gross profit margin = Markup on cost1 + Markup on cost
For the item above, the selling price is cost plus a 25% markup, or 1.25 times cost. Divide the markup by that selling-price factor to express the profit as a share of sales:
Gross profit margin = 0.251 + 0.25 = 0.251.25 = 0.20 = 20%
The denominator includes both cost and markup because the gross profit margin uses the full selling price as its base.
When the markup is known, cost can also be estimated directly from sales. Enter net sales in dollars and the markup as a decimal. The result is estimated cost of goods sold in dollars.
Estimated cost of goods sold = Net sales1 + Markup on cost
Apply this 25% markup to Second Helping's March net sales of $168,000. Goods available for sale at cost remain $154,000: beginning inventory of $38,600 plus net purchases of $115,400.
| Estimate using a markup on cost | Formula | Calculation | Result |
|---|---|---|---|
| Cost of goods sold | Net sales1 + Markup on cost | $168,0001.25 | $134,400 |
| Ending inventory | Goods available at cost − Cost of goods sold | $154,000 − $134,400 | $19,600 |
A retailer sells an item for $150 after applying a 50% markup on cost.
What are the item's cost and gross profit margin?
Compare your answer.
The selling price is 1.50 times cost.
| Measure | Calculation | Result |
|---|---|---|
| Cost | $1501.50 | $100 |
| Gross profit | $150 − $100 | $50 |
| Gross profit margin | $50$150 × 100% | Approximately 33.33% |
Limits of the gross-profit method
The gross-profit method assumes that the relationship between sales and cost of goods sold is reasonably predictable. But purchase prices, selling prices, discounts, and product mix can change that relationship. An estimate based on an earlier gross profit margin may therefore misstate both cost of goods sold and ending inventory.
The markup calculation likewise assumes that the stated markup represents the goods actually sold, including the effects of discounts. A posted markup may not represent the relationship between actual net sales and cost.
Return to Second Helping's March estimate and change the assumed gross profit margin:
| Assumed gross profit margin | Estimated cost of goods sold | Estimated ending inventory |
|---|---|---|
| 28.00% | $120,960 | $33,040 |
| 32.00% | $114,240 | $39,760 |
| 36.00% | $107,520 | $46,480 |
A lower gross profit margin means that a larger share of sales represents the cost of the goods sold. With goods available for sale unchanged, more cost assigned to goods sold leaves less in ending inventory. A higher gross profit margin has the opposite effect.
For example, reducing the assumed gross profit margin from 32% to 28% reduces estimated ending inventory by $6,720. That difference measures the estimate's sensitivity to the assumed gross profit margin. It does not establish that either gross profit margin is correct or that the resulting inventory amounts form a statistical confidence interval.
When products have substantially different gross profit margins, changes in the mix of goods sold can affect the overall gross profit margin even if sales remain stable. Estimating separate product groups may produce a more reasonable result when reliable records support the distinction.
Estimating inventory losses
When goods are lost or destroyed, the company may be unable to count them. A fire, flood, or earthquake can leave only part of the inventory available for inspection. The gross-profit method can estimate the cost of inventory that should have been on hand before the event.
To estimate the cost of missing goods, subtract the original cost of goods still present from the estimated inventory cost before the event. Both amounts must cover the same inventory and date, with any intervening movements accounted for.
Estimated cost of missing inventory = Estimated inventory cost before the event − Cost of inventory still present
The difference estimates missing inventory; it does not establish why the goods are missing. Management must investigate earlier losses and recording errors before attributing the entire difference to a particular event. Goods still present but damaged require a separate evaluation for a write-down.
In the monthly inventory estimate above, we calculated Second Helping's March ending inventory as $39,760 using a 32% gross profit margin. Now suppose a fire occurs immediately after March ends, before any additional inventory movements. That earlier estimate is therefore the estimated inventory immediately before the fire.
Investigators establish that the surviving goods have a cost of $5,600. Applying the missing-inventory calculation gives:
Estimated cost of missing inventory = $39,760 − $5,600 = $34,160
Management may use a gross-profit estimate to assess a potential loss or prepare an insurance claim, including at year-end. That use differs from using the method to establish the regular annual inventory balance. The insurer determines any reimbursement from the policy and other relevant facts, not this estimate alone.
Missing inventory and inventory destroyed in the fire are not necessarily the same thing. If goods had already disappeared through theft or unrecorded removals, the $34,160 difference could include losses unrelated to the fire. An unsuitable gross profit margin could also make the estimated inventory before the fire too high or too low.
The company must evaluate those possibilities before attributing the entire difference to the fire or recording an adjustment.
Assume management completes that investigation and supports the estimated $34,160 fire loss. Before recording the loss, the Inventory account has a debit balance of $39,760. The surviving goods remain usable and require no write-down. Second Helping records the loss by debiting an expense and crediting Inventory:
The entry reduces current income by $34,160 and leaves Inventory at $5,600, the cost of the surviving goods. Any insurance recovery requires a separate assessment; this entry records only the inventory loss.
The retail inventory method
The retail inventory method estimates inventory cost using records of the same goods at two amounts: their acquisition cost and their retail selling prices. Merchandise that cost $60 may have a retail selling price of $100. The retail inventory method uses that relationship to estimate how much of the selling-price value of unsold goods represents cost.
The retailer obtains retail value from its inventory quantities and selling-price records. For each product, it multiplies the quantity by the recorded selling price, then adds those amounts across products. It records beginning inventory and purchases at both cost and retail value. The retail amount for a purchase is what the retailer plans to charge customers, not what it paid the supplier.
A retailer may track the selling-price value of merchandise remaining without identifying the cost of every individual item. If selling prices have not changed and sales are the only reduction in inventory, subtracting sales from goods available at retail gives the retail value of goods remaining.
The company cannot report the retail selling-price value of its unsold goods as inventory cost. It includes an anticipated gross profit that the company has not yet earned. The company must estimate how much of the remaining retail value represents cost.
The cost-to-retail ratio expresses the recorded cost of merchandise as a percentage of its retail value. For merchandise costing $60 with a retail value of $100, the ratio is 60%. Applying that percentage to the retail value of unsold merchandise estimates its cost.
Chapter 16 distinguished the costs assigned under average cost, FIFO, and LIFO. Retail estimation also requires a cost-flow assumption. Under average-cost retail, we combine beginning inventory and purchases into one cost-to-retail ratio. FIFO and LIFO retail calculations keep those amounts separate. We first work through average-cost retail, then compare the layer calculations. A pool is the group of goods included in that calculation.
Cost-to-retail ratio = Goods available at costGoods available at retail
Ending inventory at retail = Goods available at retail − Net sales
Estimated ending inventory at cost = Ending inventory at retail × Cost-to-retail ratio
The ratio gives a reasonable estimate only if the unsold goods have a similar cost-to-retail relationship to the goods in the full pool.
A retailer has unsold goods with a retail value of $40,000. Its cost-to-retail ratio is 60%. What is the estimated cost of ending inventory?
Compare your answer.
Estimated ending inventory cost = Retail value of unsold goods × Cost-to-retail ratio = $40,000 × 60% = $24,000
Apply the ratio to the unsold goods' retail value to estimate their cost.
From retail value to estimated cost
For the retail-method example, instead assume that Second Helping has the following April 2026 kitchenware inventory. Its records include beginning inventory and purchases at both cost and retail selling prices. Net sales are $143,000. There are no price changes, sales returns, inventory losses, or other movements. The recorded retail prices reflect the prices at which goods were sold.
| April inventory pool | Cost | Retail |
|---|---|---|
| Beginning inventory | $22,800 | $38,000 |
| Net purchases | $91,200 | $152,000 |
| Goods available | $114,000 | $190,000 |
Both columns describe the same merchandise. The cost column records what the goods cost Second Helping; the retail column records their selling-price value.
The calculation has three steps. First, determine the cost represented by each dollar of retail value. Next, subtract sales to find the retail value remaining. Finally, apply the ratio to estimate the cost of those unsold goods.
Each dollar of recorded retail value represents 60 cents of cost and 40 cents of anticipated gross profit, on average. Applying the ratio removes that estimated profit portion from the unsold goods. After estimating ending inventory, calculate cost of goods sold:
| Formula | Calculation | Estimated cost of goods sold |
|---|---|---|
| Goods available at cost − Estimated ending inventory at cost | $114,000 − $28,200 | $85,800 |
FIFO and LIFO retail estimates
Review the cost-flow methods in Chapter 16. FIFO assigns older costs to sales first; LIFO assigns newer costs first.
The retail calculation begins the same way under each cost-flow assumption: subtract sales from goods available at retail to find ending inventory at retail. The difference is which cost-to-retail ratio applies to the remaining goods. Under average-cost retail, we use a combined ratio. Under FIFO retail, ending inventory comes from the newer purchases when those purchases cover the ending balance. Under LIFO retail, older layers remain, and an increase adds a new layer at the current period's ratio.
Different ratios for beginning inventory and purchases
Instead, assume that Second Helping has the following April records. Selling prices remain unchanged, but purchase costs have increased. All current purchases have the same cost-to-retail ratio. Beginning inventory is one opening layer; there are no markdowns, losses, returns, or other inventory movements. These are periodic estimates made at the end of April.
| Inventory source | Cost | Retail | Cost-to-retail ratio |
|---|---|---|---|
| Beginning inventory | $20,000 | $40,000 | $20,000$40,000 = 50% |
| April purchases | $112,000 | $160,000 | $112,000$160,000 = 70% |
| Goods available | $132,000 | $200,000 | Combined ratio: $132,000$200,000 = 66% |
There are two layer ratios: 50% for beginning inventory and 70% for April purchases. The opening ratio relates the opening goods' retail value to their recorded cost. The purchases ratio relates April's retail value to April's purchase cost. FIFO and LIFO keep these relationships separate; the 66% combined ratio is used only for the average-cost comparison.
Net sales are $140,000. The unsold retail value is the same under all three cost-flow assumptions:
Ending inventory at retail = $200,000 − $140,000 = $60,000
The layer diagrams use the same older-at-bottom, newer-at-top arrangement as Chapter 16. Start with the same goods under each method, assign the sales, and calculate the cost of the remaining layers. Retail amounts identify the portions assigned to sales and to ending inventory. Both cost of goods sold and ending inventory are measured at cost. The applicable ratio converts a retail amount to cost; an opening layer retains its recorded cost. The diagrams represent cost assignments, not the physical order in which goods sell.
FIFO retail: apply the purchases ratio to remaining goods
FIFO assigns the opening layer to sales first at its recorded cost, which corresponds to the 50% opening ratio. Sales then use part of April's purchases at their 70% ratio. Only April purchases remain, so the ending inventory estimate uses the purchases ratio.
$160,000 retail
$112,000 cost
Cost-to-retail ratio: 70%
$40,000 retail × 50%
= $20,000 recorded cost
Retail value: $200,000
Cost: $132,000
$60,000 retail × 70%
= $42,000 cost
$100,000 retail × 70%
= $70,000 cost
$40,000 retail × 50%
= $20,000 recorded cost
Retail value sold: $140,000
Estimated cost: $90,000
Retail value: $60,000
Estimated cost: $42,000
LIFO retail: retain the opening layer and cost the increase
LIFO assigns sales to April's purchases first, using their 70% ratio to estimate cost of goods sold. The remaining April purchases use that same ratio. The entire opening layer also remains at its recorded cost, which corresponds to its 50% ratio. Ending inventory therefore contains costs from both layers; the purchases ratio does not replace the opening ratio.
$160,000 retail
$112,000 cost
Cost-to-retail ratio: 70%
$40,000 retail × 50%
= $20,000 recorded cost
Retail value: $200,000
Cost: $132,000
$140,000 retail × 70%
= $98,000 cost
$160,000 − $140,000 = $20,000 retail
$20,000 × 70% = $14,000 cost
$40,000 retail × 50%
= $20,000 cost
Retail value sold: $140,000
Estimated cost: $98,000
Retail value: $60,000
Estimated cost: $34,000
With several opening LIFO layers, an inventory decrease removes the newest of those layers first. When retail prices change, dollar-value LIFO retail requires price indexes to distinguish price changes from changes in the inventory pool. The unchanged-price illustration above does not require that adjustment.
Compare the cost assignments
Average-cost retail combines the two sources before costing the unsold goods. Under FIFO, all remaining goods come from April purchases, so their cost uses April's 70% cost-to-retail ratio. LIFO retail retains the opening cost and adds the cost of the new layer.
| Method | Ending inventory calculation | Estimated ending cost |
|---|---|---|
| Average-cost retail | $60,000 × 66% | $39,600 |
| FIFO retail | $60,000 × 70% | $42,000 |
| LIFO retail | $20,000 + $14,000 | $34,000 |
Purchase costs increased while selling prices stayed unchanged. FIFO therefore leaves the higher current costs in inventory, LIFO retains older lower costs, and average cost falls between them, as in Chapter 16.
Under LIFO retail, which ratio applies to beginning inventory that remains unsold: its original ratio or the current purchases ratio?
Compare your answer.
Its original ratio. The company retains the beginning inventory at its recorded cost and uses the current purchases ratio for a new layer.
Apply the inventory measurement rule after estimating cost
Review Chapter 17's lower-of-cost-or-market rule for inventory measured using LIFO or the retail method.
The amounts above estimate cost before any required write-down. Under US GAAP, retail-method inventory remains subject to lower of cost or market under ASC 330-10-35-1C and 35-7. That includes average-cost retail and FIFO retail. The lower-of-cost-and-net-realizable-value rule for ordinary FIFO or average-cost inventory does not apply merely because a retail calculation uses that cost-flow assumption. The retail method remains part of the company's measurement basis.
Limits of the retail inventory method
The April calculation assumes unchanged selling prices and that recorded sales account for all merchandise no longer on hand. Actual retail operations can include price changes and inventory losses.
Price changes affect retail value without necessarily changing cost. Suppose Second Helping reduces an item's price from $100 to $80. Its recorded retail value falls by $20, even though its original cost has not changed. Ignoring the price reduction would overstate the retail value still available for sale.
A markdown is a reduction from a previously established retail price. Retailers record permanent markdowns as reductions in inventory's retail value when they reduce the prices. The acquisition cost of those goods has not changed.
Markdowns in the retail calculation
A retailer can use average-cost retail or conventional retail to determine the inventory amount it reports in its financial statements. Average-cost retail estimates cost first, followed by any required write-down. Conventional retail approximates lower of cost or market within the calculation. The company selects an appropriate method for the inventory being measured and applies it consistently. It does not calculate both each period and choose the preferred result.
Chapter 17 established that inventory measured using the retail method is subject to lower of cost or market. That requirement applies to both methods.
A markdown reduces a selling price; it does not directly measure the replacement cost, ceiling, and floor used to determine market in Chapter 17. However, a permanent price reduction can indicate that merchandise has lost value. Conventional retail uses that reduction to approximate the decline. The company must still evaluate whether the result reasonably reflects lower of cost or market.
In the formulas below, original retail value means the retail value of all goods available before markdowns.
Under average-cost retail, subtract markdowns from goods available at retail before calculating the cost-to-retail ratio. The smaller retail denominator produces a higher ratio: each dollar of the reduced selling price now represents more cost.
Average-cost retail method
Cost-to-retail ratio = Goods available at costOriginal retail value − Markdowns
Under conventional retail, exclude markdowns from the ratio calculation but subtract them when determining ending inventory at retail. The ratio therefore does not rise to offset the lower retail prices. Applying that ratio to the reduced retail value produces a lower inventory amount, which is how the method approximates a decline in value.
Conventional retail method
Cost-to-retail ratio = Goods available at costOriginal retail value
For both methods, subtract markdowns and net sales to determine the retail value remaining. Use the cost-to-retail ratio for the selected method. These formulas assume no other price changes or inventory movements.
Ending inventory at retail = Original retail value − Markdowns − Net sales
Estimated ending inventory = Ending inventory at retail × Cost-to-retail ratio
Suppose Second Helping has goods available costing $60,000, with original retail prices totaling $100,000. It records permanent markdowns of $20,000 and net sales of $40,000. There are no other price changes or inventory movements.
The comparison below applies each alternative to the same facts to show how the results differ. Second Helping would use its selected method, rather than perform one calculation followed by the other.
Either method starts with the same ending inventory at retail:
| Calculation | Formula | Amounts | Result |
|---|---|---|---|
| Ending inventory at retail | Original retail value − Markdowns − Net sales | $100,000 − $20,000 − $40,000 | $40,000 |
The methods then use different denominators to convert that retail value:
| Method | Cost-to-retail ratio formula | Calculation | Ratio |
|---|---|---|---|
| Average-cost retail | Goods available at costOriginal retail value − Markdowns | $60,000$100,000 − $20,000 | 75% |
| Conventional retail | Goods available at costOriginal retail value | $60,000$100,000 | 60% |
Apply each method's ratio to ending inventory at retail:
| Method | Calculation | Ending inventory |
|---|---|---|
| Average-cost retail | $40,000 × 75% | $30,000 estimated cost |
| Conventional retail | $40,000 × 60% | $24,000 approximating lower of cost or market |
The $30,000 average-cost result estimates cost before any required write-down. The $24,000 conventional result includes an approximation of the decline in value. The difference between them is not automatically a required write-down: these facts do not establish replacement cost or the ceiling and floor for market. Under either method, the company must evaluate the result against the lower-of-cost-or-market requirement. Choosing a different denominator does not change that requirement.
Under average-cost retail, do markdowns increase or decrease the cost-to-retail ratio?
Compare your answer.
They increase it. Markdowns reduce the retail denominator while acquisition cost stays the same.
Missing goods and changes in product mix
Missing goods create a different problem. Goods may disappear through theft or unrecorded removals without a sale. Subtracting only sales from goods available at retail can leave merchandise in the calculated balance that is no longer on hand. A physical count and investigation help identify these differences. Damaged goods may still be present but require a write-down.
Product mix also matters. Suppose one kitchenware group has a cost-to-retail ratio of 50%. Another group has a ratio of 75%. If most of the lower-ratio merchandise sells first, the remaining goods may have a higher ratio than the original pool. Applying the original average could underestimate ending inventory cost.
Companies may therefore calculate separate ratios for departments or merchandise groups with substantially different gross profit margins. The average relationship must reasonably represent the goods remaining.
Retail methods under US GAAP and IFRS
Under International Financial Reporting Standards (IFRS), IAS 2.21–22 permits retail estimation when results approximate cost. It describes use for goods with similar gross profit margins and accounts for the effect of markdowns. The estimate remains subject to the inventory measurement requirements discussed in Chapter 17.
From the operating cycle to the cash conversion cycle
A company acquires inventory, holds it until sale, and collects payment from the customer. A cash sale brings in payment at the time of sale. A credit sale creates a receivable, which remains outstanding until the customer pays. The operating cycle runs from acquiring inventory to collecting cash from its sale. It includes the inventory holding period and, for credit sales, the collection period.
For a manufacturer, the inventory holding period begins when it acquires raw materials. It includes the time those materials await production, the time goods spend in production as work in process, and the time finished goods await sale.
Buying inventory or materials on credit allows a company to pay the supplier later. The operating cycle begins when the company acquires the goods, so it includes the time before the supplier is paid. The cash conversion cycle measures the time from that supplier payment to customer collection. Calculate it by subtracting the time from purchase to supplier payment from the full operating cycle.
To calculate these cycles, we first estimate customer collection days, days in inventory, and supplier payment days. The following example supplies the information needed for each calculation. Published financial statements may require approximations because they do not always separate credit sales and credit purchases.
If the customer pays before the company pays its supplier, the cash conversion cycle is negative.
Customer collection periods
Credit sales create receivables that remain outstanding until customers pay. Cash sales bring in payment at the time of sale and do not create receivables. We therefore use credit sales when measuring customer collection time. Including cash sales would make the estimated collection period appear shorter.
Accounts receivable turnover measures how many times a company's net credit sales equal its average receivable balance during a period. Higher turnover generally indicates faster collection: the company carries fewer unpaid receivables relative to its credit sales.
Days sales outstanding (DSO) expresses that relationship as an estimated collection period. We call it collection days below. It helps the company assess how long it waits for customer cash and compare that wait with its credit terms. Collection days substantially longer than the payment terms may warrant investigating overdue accounts. The measure is an average; it does not show whether a particular customer has paid on time.
To calculate collection days, divide average receivables by average daily credit sales. The result tells us how many days of credit sales are represented by the average unpaid balance.
For the annual operating examples, instead assume that Second Helping reports these 2026 amounts. They replace the earlier inventory-estimation facts. Use a 365-day year throughout the annual calculations.
| Collection inputs | Amount |
|---|---|
| Net credit sales | $438,000 |
| Cash sales | $73,000 |
These receivables arise only from customer credit sales. As in Chapter 14, subtract the allowance for credit losses from gross receivables to determine net receivables.
| Trade receivables | Beginning of 2026 | End of 2026 |
|---|---|---|
| Gross trade receivables | $40,000 | $48,000 |
| Less: Allowance for credit losses | ($2,200) | ($1,800) |
| Net trade receivables | $37,800 | $46,200 |
Use net trade receivables for both turnover and collection days in this example and in the comparison with 2027.
| Calculation | Formula | 2026 amounts | Result |
|---|---|---|---|
| Average net receivables | Beginning net receivables + Ending net receivables2 | $37,800 + $46,2002 | $42,000 |
| Average daily credit sales | Net credit salesDays in the period | $438,000365 | $1,200 per day |
| Collection days | Average net receivablesAverage daily credit sales | $42,000$1,200 | 35.00 days |
| Receivable turnover | Net credit salesAverage net receivables | $438,000$42,000 | 10.43 times |
The average net receivable balance equals 35.00 days of credit sales. That estimate describes the balance relative to the sales rate; individual customers may pay sooner or later.
The allowance for credit losses also affects these measures. With gross receivables and sales unchanged, a larger allowance reduces net receivables. That raises turnover and shortens calculated collection days even though customers have not paid faster. Review changes in the allowance before attributing a change in these ratios to customer payment behavior.
- Mistaken idea: An ending balance automatically matches a period flow
Correction: A year-end balance may differ substantially from the amounts held during the year. For example, annual sales cover the whole year, while year-end receivables cover only unpaid amounts at that date. Receivables turnover therefore uses average receivables to estimate the amount awaiting collection during the year.
Read the full explanation - Mistaken idea: Total sales and credit sales are interchangeable in receivables turnover
Correction: Receivables turnover uses net credit sales because those sales create customer receivables. Cash sales are paid at sale and do not create receivables. Total net sales can include both kinds of sales.
Read the full explanation
Collection days cannot be calculated with zero credit sales. Receivable turnover cannot be calculated when average net receivables are zero. In each case, the calculation would require dividing by zero.
Inventory holding periods
In Chapter 16, we used days in inventory to estimate how long goods remain unsold. We now use that same measure as part of the cash conversion cycle, alongside customer collection time and supplier payment time. It is also called days inventory outstanding (DIO).
For the same 2026 case, Second Helping reports cost of goods sold of $310,250. Inventory is $29,125 at the beginning of the year and $47,375 at year-end, giving average inventory of $38,250.
| Calculation | 2026 amounts | Result |
|---|---|---|
| Inventory turnover | $310,250$38,250 | 8.11 times |
| Days in inventory | 365$310,250$38,250 | 45.00 days |
The days calculation uses unrounded turnover. The inventory holding period ends at the sale. For a credit sale, the customer collection period then begins. We add these periods when calculating the operating cycle.
Days in inventory cannot be calculated with zero cost of goods sold. Inventory turnover cannot be calculated when average inventory is zero.
Supplier payment periods
Credit purchases create supplier payables, and payments reduce them. The average payable balance represents purchases still awaiting payment. Dividing that balance by average credit purchases per day expresses the amount owed as days of purchases. This is days payables outstanding (DPO), an estimate of the time taken to pay suppliers.
Accounts payable turnover divides net credit inventory purchases by average related trade payables. Higher turnover means the purchase flow is larger relative to the unpaid balance. With other conditions unchanged, that corresponds to fewer payment days.
Include only amounts owed for the credit inventory purchases used in the calculation. Exclude all other payables.
Credit purchases create amounts owed to suppliers, so we use credit purchases to calculate payment days. Cost of goods sold measures the cost of inventory sold during the period. Those goods may have been purchased in an earlier period, while some current purchases may remain unsold. Purchases and cost of goods sold therefore need not be equal.
The Inventory T-account shows the basic relationship between purchases, goods sold, and inventory remaining. Purchases increase Inventory. When goods are sold, the company credits Inventory and debits Cost of Goods Sold.
Review the write-down entry and separate inventory valuation allowance in Chapter 17.
Losses and write-downs require an adjustment to this basic reconciliation. A direct write-off credits Inventory; a write-down through an inventory valuation allowance credits that separate account.
When calculating purchases from reported amounts, use beginning and ending inventory net of any inventory valuation allowance. Add losses and write-downs to reported COGS only when they are not already included in it. If reported COGS includes those expenses, adding them again would count the same reduction twice.
For a retailer, inventory additions generally come from buying merchandise. For a manufacturer, inventory also increases as production labor and overhead are added. Working backward from COGS and total inventory balances therefore gives total inventory costs added, not just purchases from suppliers. Total inventory here includes raw materials, work in process, and finished goods. To isolate purchased materials, subtract the production labor and overhead added to inventory during the period, after accounting for losses and write-downs as explained above. This gives total materials purchases; payment days requires the portion purchased on credit and the corresponding payables.
For a retailer with no other inventory changes:
This calculation gives total net purchases. Use the portion purchased on credit when calculating supplier payment days.
For Second Helping, all inventory purchases are on credit. Trade payables are $23,100 at the beginning of 2026 and $27,300 at year-end. They relate only to inventory purchases. Cost of goods sold is $310,250. Beginning inventory is $29,125, and ending inventory is $47,375. No losses, write-downs, or other inventory movements affect this reconciliation.
| Calculation | Formula | 2026 amounts | Result |
|---|---|---|---|
| Credit purchases | Cost of goods sold + Ending inventory − Beginning inventory | $310,250 + $47,375 − $29,125 | $328,500 |
| Average payables | Beginning trade payables + Ending trade payables2 | $23,100 + $27,3002 | $25,200 |
| Average daily credit purchases | Credit purchasesDays in the period | $328,500365 | $900 per day |
| Payment days | Average trade payablesCredit purchases × Days in the period | $25,200$328,500 × 365 | 28.00 days |
| Payable turnover | Credit purchasesAverage trade payables | $328,500$25,200 | 13.04 times |
The average amount owed equals 28.00 days of credit purchases. Supplier credit finances that part of the operating cycle before Second Helping pays for the goods.
Using cost of goods sold as a proxy would instead produce 29.65 days. Inventory increased, so cost of goods sold is smaller than purchases here. The smaller denominator overstates payment days and makes the calculated cash conversion cycle shorter.
When inventory increases, how does using cost of goods sold instead of credit purchases affect payment days? Assume all purchases are on credit and there are no other inventory changes.
Compare your answer.
It overstates payment days. Purchases exceed cost of goods sold, so substituting cost of goods sold makes the denominator too small.
Payment days cannot be calculated with zero credit purchases. Payable turnover cannot be calculated when average trade payables are zero.
The cash conversion cycle
Return to the cycle diagram introduced earlier, now using Second Helping's calculated periods. The upper row combines inventory holding and customer collection time. The lower row separates the supplier-credit period from the time Second Helping finances the purchase.
| 2026 calculation | Amounts | Result |
|---|---|---|
| Operating cycle | 45.00 + 35.00 | 80.00 days |
| Cash conversion cycle | 45.00 + 35.00 − 28.00 | 52.00 days |
A retailer takes longer to pay suppliers. If days in inventory and collection days stay unchanged, does its cash conversion cycle increase or decrease?
Compare your answer.
It decreases. The retailer pays later but collects at the same time, shortening the interval it must finance.
Compare the annual cycles
The following table brings together Second Helping's 2026 inputs and the corresponding 2027 amounts. The same assumptions apply in both years.
| Annual amount | 2026 | 2027 |
|---|---|---|
| Net credit sales | $438,000 | $547,500 |
| Cash sales | $73,000 | $91,250 |
| Cost of goods sold | $310,250 | $365,000 |
| Beginning inventory | $29,125 | $47,375 |
| Ending inventory | $47,375 | $58,325 |
| Beginning net trade receivables | $37,800 | $46,200 |
| Ending net trade receivables | $46,200 | $73,800 |
| Beginning trade payables | $23,100 | $27,300 |
| Total assets | $240,000 | $300,000 |
| Ending trade payables | $27,300 | $44,800 |
The 2026 cash conversion cycle was 52.00 days. To determine what changed in 2027, first calculate the new average balances and credit purchases.
| 2027 calculation | Amounts | Result |
|---|---|---|
| Average net receivables | $46,200 + $73,8002 | $60,000 |
| Average inventory | $47,375 + $58,3252 | $52,850 |
| Credit purchases | $365,000 + $58,325 − $47,375 | $375,950 |
| Average trade payables | $27,300 + $44,8002 | $36,050 |
Next, calculate the three periods using those amounts. Collection days uses average daily credit sales; payment days uses average daily credit purchases. Days in inventory uses unrounded inventory turnover.
| 2027 calculation | Formula | Amounts | Result |
|---|---|---|---|
| Average daily credit sales | Net credit salesDays in the period | $547,500365 | $1,500 per day |
| Collection days | Average net receivablesAverage daily credit sales | $60,000$1,500 | 40.00 days |
| Days in inventory | Days in the periodInventory turnover | 365$365,000$52,850 | 52.85 days |
| Average daily credit purchases | Credit purchasesDays in the period | $375,950365 | $1,030 per day |
| Payment days | Average trade payablesAverage daily credit purchases | $36,050$1,030 | 35.00 days |
| Operating cycle | Days in inventory + Collection days | 52.85 + 40.00 | 92.85 days |
| Cash conversion cycle | Days in inventory + Collection days − Payment days | 52.85 + 40.00 − 35.00 | 57.85 days |
Now compare the periods with 2026:
| Comparable annual measure | 2026 | 2027 |
|---|---|---|
| Collection days | 35.00 | 40.00 |
| Days in inventory | 45.00 | 52.85 |
| Payment days | 28.00 | 35.00 |
| Operating cycle | 80.00 | 92.85 |
| Cash conversion cycle | 52.00 | 57.85 |
Longer collection and inventory periods lengthen the cash conversion cycle. Longer payment periods shorten it because the company pays suppliers later. The contribution of each change is:
| Component | Change from 2026 to 2027 | Effect on the cash conversion cycle |
|---|---|---|
| Collection days | 40.00 − 35.00 = 5.00 days | Lengthens it by 5.00 days |
| Days in inventory | 52.85 − 45.00 = 7.85 days | Lengthens it by 7.85 days |
| Payment days | 35.00 − 28.00 = 7.00 days | Shortens it by 7.00 days |
| Net change | 5.00 + 7.85 − 7.00 | Increase of 5.85 days |
Second Helping takes longer to sell its inventory and collect from customers. The additional supplier payment time offsets part of that delay, but the company still finances its purchases for a longer period overall.
The arithmetic identifies contributing components. It does not establish why they changed. Inspect customer aging, collection terms, product availability, supplier terms, and overdue invoices before judging management performance. Longer payment days may reflect negotiated credit or financial stress.
Sales growth and inventory investment
In Chapter 9, we used horizontal analysis to measure changes between periods and common-size analysis to express balance-sheet amounts as percentages of total assets. Here, we apply those methods to Second Helping's inventory and compare the results with days in inventory.
Horizontal analysis measures growth relative to the earlier amount:
Total sales include both credit and cash sales:
| Year | Credit sales + Cash sales | Total sales |
|---|---|---|
| 2026 | $438,000 + $73,000 | $511,000 |
| 2027 | $547,500 + $91,250 | $638,750 |
| Measure | Calculation | Percentage change |
|---|---|---|
| Total sales growth | $638,750 − $511,000$511,000 × 100% | 25.00% |
For inventory growth, use Second Helping's year-end inventory balances, net of any inventory valuation allowance:
| Year-end inventory | Amount |
|---|---|
| 2026 | $47,375 |
| 2027 | $58,325 |
| Measure | Calculation | Percentage change |
|---|---|---|
| Ending inventory growth | $58,325 − $47,375$47,375 × 100% | 23.11% |
Second Helping's total sales grow by 25.00%, while ending inventory grows by 23.11%. The different growth rates can identify a balance requiring explanation, but do not establish the cause.
For common-size analysis, use total assets as the base, as in Chapter 9. Dividing inventory by total assets gives the share of reported assets held in inventory.
For the common-size comparison, use ending inventory and total assets at each year-end:
| Year-end balance | 2026 | 2027 |
|---|---|---|
| Ending inventory, net | $47,375 | $58,325 |
| Total assets | $240,000 | $300,000 |
| Year | Calculation | Inventory share |
|---|---|---|
| 2026 | $47,375$240,000 × 100% | 19.74% |
| 2027 | $58,325$300,000 × 100% | 19.44% |
Ending inventory equals 19.74% of total assets in 2026 and 19.44% in 2027. The share decreases even though days in inventory increase.
The common-size percentage shows how much of the company's reported assets consists of inventory at year-end. Days in inventory estimates how long goods remain unsold during the year. Inventory can become a smaller share of total assets while taking longer to sell, as it does here. The smaller asset share does not indicate faster selling.
Interpreting the cash conversion cycle
A negative cash conversion cycle occurs when supplier payment days exceed inventory plus collection days. A cash-sale retailer may collect customer cash before paying the supplier. The negative result describes that relationship; it does not mean goods moved backward through the business.
A shorter cycle can reduce financing needs, but it can also accompany stockouts or delayed supplier payments. A stockout occurs when a company has no inventory available to meet customer demand for a product. A company can also shorten collection time by requiring faster payment, lowering credit limits, or requiring some customers to pay upfront. Those changes may reduce sales.
A profitable business can still face a cash shortage. Payroll, rent, debt service, capital spending, and taxes are outside this cycle calculation. Use a cash forecast and actual payment schedules when the question concerns a future cash shortfall.
- Mistaken idea: A shorter cash conversion cycle is always better
Correction: A shorter cash conversion cycle can reduce the time a company must finance inventory and customer receivables. It does not establish that the company's operating decisions improved profitability or its ability to pay every obligation.
Read the full explanation
For a seasonal business, the average of beginning and ending balances may not represent the inventory, receivables, or payables it carries throughout the year. Both dates could fall outside the busy season and miss much higher balances during that season. Monthly or more frequent balances can provide an average that better reflects those changes. Compare similar businesses, fiscal periods, credit policies, and accounting methods.
An inventory estimate provides an amount to compare with a later count or use when goods are no longer available to count. Differences can reflect an unsuitable gross profit margin, changes in retail prices, missing goods, or incomplete records. The estimate alone cannot identify the cause.
The cash conversion cycle combines inventory holding time, customer collection time, and supplier payment time. In Second Helping's case, longer supplier payment time only partly offset the increases in days in inventory and collection days. The company must finance its purchases for longer. Management needs to investigate why goods remained unsold longer and why the average collection period increased. The ratios alone do not show whether those changes reflect planned decisions, seasonal patterns, or operating problems.